2012 Lexus IS 350 User Guide - Page 30

37

1-2. Opening, closing and locking the doors and trunk

1

■

Switching the door unlock function

It is possible to set which doors the entry function unlocks.

Turn the “ENGINE START STOP” switch OFF.

When the indicator on the key surface is turned off, push and

hold

,

or

for approximately 5 seconds while pushing

on the key.

The setting changes each time an operation is performed, as shown below. (When

changing the setting continuously, release the buttons, wait for at least 5 seconds,

and repeat step 2.)

To prevent unintended triggering of the alarm, unlock the doors using the electronic

key and open and close a door once after the settings have been changed. (If a

door is not opened within 60 seconds after

is pressed, the doors will be locked

again and the alarm will automatically be set.)

In case that the alarm is triggered, immediately stop the alarm. (

→

P. 100)

STEP

1

STEP

2

Multi-information

display

Unlocking doors

Beep

Hold the driver's door handle

to unlock only the driver's

door.

Exterior: Beeps three

times

Interior: Pings once

Hold the passenger’s door

handle to unlock both side

doors.

Hold either door handle to

unlock both side doors.

Exterior: Beeps twice

Interior: Pings once