2001 Lincoln LS Owner's Manual - Page 207

Maintenance and care 1. 2. 3. 4. Pull off the road as soon as safely possible and turn off the engine. Arrange for the vehicle to be taken to a service facility. If this is not possible, wait a short period for the engine to cool. Check the coolant level and replenish if low. Never remove the coolant reservoir cap while the engine is running or hot. 5. Re-start the engine and take your vehicle to a service facility. Driving the vehicle without repairing the engine problem increases the chance of engine damage. Take your vehicle to a service facility as soon as possible. Checking and adding engine cooling fan hydraulic fluid Check the engine cooling fan hydraulic fluid. Refer to the scheduled maintenance guide for the service interval schedules. If adding fluid is necessary, use only MERCON ATF. Check the fluid level when it is at ambient temperature (-7° to 25° C [20° to 80° F]): 1. Check the fluid level in the reservoir. It should be between the MIN and MAX lines. Do not add fluid if the level is in this range. 2. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the range between the MIN and MAX lines. Be sure to put the cap back on the reservoir. MAX MIN XAM NIM 207