2004 Lincoln Navigator Owner Guide 4th Printing - Page 122
2004 Lincoln Navigator Manual
Page 122 highlights
Lights Replacing back-up lamp bulbs The back-up lamp bulbs are located behind the liftgate trim panels. To change the back-up lamp bulbs: 1. Make sure the headlamp switch is in the OFF position. 2. Remove the liftgate trim panel by removing the retaining nuts to expose the bulb socket. 3. Turn the bulb socket counterclockwise and pull it out of the back-up lamp assembly. 4. Pull out the old bulb and replace it by pushing in a new bulb. 5. Push the connector back into the back-up lamp assembly and turn it clockwise to secure it in place. 6. Reinstall the liftgate trim panel. Replacing liftgate tail lamp bulb 1. Make sure the headlamp switch is in the OFF position. 2. Raise the liftgate and remove the two retaining nuts on the underside of the liftgate. 122 2004 Navigator (nav) Owners Guide (post-2002-fmt) USA English (fus)