2008 Lincoln Town Car Owner Guide 2nd Printing - Page 42

Lights 4. Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly. 5. Pull the bulb from the socket and push in the new bulb. 6. To complete installation, follow the removal procedure in reverse order. Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the off position, then remove two screws, grommets and the license plate lamp assembly from the trunk lid. 2. Carefully pull the bulb from the socket and push in the new bulb. 3. Install the lamp assembly on trunk lid with two grommets, ensuring the grommets are pushed all the way in to the trunk lid and secure with two screws. Replacing backup lamp bulbs 1. Make sure the headlamp switch is in the off position, then open trunk and carefully pull the trunk lid liner away to expose the lamp assembly. 2. Remove bulb socket from the trunk lid by turning counterclockwise. 3. Pull the bulb straight out of the socket and push in the new bulb. 4. Install the bulb socket in trunk lid by turning clockwise. 42 2008 Town Car (tow) Owners Guide (post-2002-fmt) USA (fus)