2010 Lincoln MKS Owner Guide 2nd Printing - Page 26
2010 Lincoln MKS Manual
Page 26 highlights
Instrument Cluster INTKEY COULD NOT PROGRAM - Displayed when an attempt is made to program a fifth integrated key to the remote keyless entry system. For more information on integrated key, refer to the Locks and Security chapter. CRUISE ON RADAR READY (if equipped) - Displayed when the driver pressed the cruise On/Off control and ACC was off. CRUISE OFF (if equipped) - Displayed when the driver pressed the Cruise On/Off control and ACC was on. SET XXX MPH GAP ACC GAP (if equipped) - Displayed when ACC is active and driver has selected a GAP setting using the steering wheel control button. CRUISE CANCELED (if equipped) - Displayed when the ACC system has been turned off by applying the vehicle's brakes. CRUISE OVERRIDE (if equipped) - Displayed when the accelerator pedal is being pressed while ACC is active. CRUISE NOT AVAILABLE (if equipped) - Displayed when a system malfunction is preventing ACC from engaging. CRUISE MALFUNCTION (if equipped) - Displayed when a radar malfunction is preventing the ACC from engaging. CRUISE NOT AVAILABLE SENSOR BLOCKED SEE MANUAL (if equipped) - Displayed when the radar is blocked because of poor radar visibility due to bad weather or ice/mud/water in front of radar. Driver can typically clean the sensor to resolve. COLLISION WARN MALFUNCTION (if equipped) - Displayed when there is a system malfunction with the collision warning system. The system will be disabled. COLLISION WARN NOT AVAILABLE (if equipped) - Displayed when there is a system malfunction with the collision warning system. The system will be disabled. COLLISION WARN NOT AVAILABLE SENSOR BLOCKED SEE MANUAL (if equipped) - Displayed when the collision warning system radar is blocked because of poor radar visibility due to bad weather or ice/mud/water in front of the radar. Driver can typically clean the sensor to resolve. PRESS BRAKE TO START (if equipped) - Displayed when the start/stop button is pressed without the brake pedal being applied. This is a reminder that the brake pedal must be applied when the start/stop button is pressed in order to start the engine. 26 2010 MKS (mks) Owners Guide, 2nd Printing USA (fus)