2010 Lincoln Town Car Owner Guide 1st Printing - Page 52

Lights Replacing backup lamp bulbs 1. Make sure the headlamp switch is in the off position, then open the trunk and carefully pull the trunk lid liner away to expose the lamp assembly. 2. Remove bulb socket from the trunk lid by turning it counterclockwise. 3. Pull the bulb straight out of the socket and push in the new bulb. 4. Install the bulb socket in trunk lid by turning clockwise. Replacing high-mount brakelamp assembly To change the high-mount brakelamp assembly: 1. Remove the high-mount brakelamp assembly from the headliner by pulling downward on the assembly. 2. Disconnect the electrical connector and remove the assembly. 3. Install the new assembly by aligning the tabs and pushing upward until it snaps in place. 52 2010 Town Car (tow) Owners Guide, 1st Printing USA (fus)