2007 Mazda CX-7 Owner's Manual - Page 89
2007 Mazda CX-7 Manual
Page 89 highlights
CX-7_8V28-EA-06B_Edition2 Page89 Monday, March 13 2006 5:5 PM Black plate (89,1) Knowing Your Mazda Advanced Keyless Entry and Start System 3. Push in the start knob from the ACC position and turn it to the LOCK position. CAUTION Don't try the starter for more than 10 seconds at a time. If the engine stalls or fails to start, wait 10 seconds before trying again. Otherwise, you may damage the starter and drain the battery. 10. After starting the engine, let it idle for about 10 seconds. NOTE l CAUTION When leaving the vehicle, make sure the ignition switch is turned to the LOCK position. NOTE l In extremely cold weather, below _18° C (0° F), or after the vehicle has not been driven in several days, let the engine warm up without operating the accelerator. Whether the engine is cold or warm, it should be started without use of the accelerator. l l When turning the ignition switch to the LOCK position, the ignition switch has to be pushed in from the ACC position and turned. Without being pushed in, the ignition switch stops at the ACC position and the vehicle battery may be discharged if the ignition switch is left in the ACC position. When leaving the vehicle, make sure the ignition switch is turned to the LOCK position. If the vehicle is left with the ignition switch not in the LOCK position, a beep sound is heard and the indicator light flashes to notify the driver. Refer to Warning Beep (page 3-17). Turning off the engine 1. Shift the shift lever to the P position. 2. Turn the ignition switch from the ON position to the ACC position. NOTE When the engine is turned off and the ignition switch it turned from the ACC position to the LOCK position, the KEY indicator light (green) flashes in the instrument cluster for about 30 seconds if the battery power of the advanced key is low. Replace the battery with a new one. Refer to Battery Replacement (page 3-6). 3-13 Form No.8V28-EA-06B