2007 Mazda CX-9 Owner's Manual - Page 422

CX-9_8V83-EA-06I_Edition3 Page422 Monday, February 26 2007 7:21 PM Black plate (422,1) Maintenance and Care Owner Maintenance 8. Install the coolant reservoir. If you are unsure of how tight the bolts should be, have them inspected at an Authorized Mazda Dealer. Bolt tightening torque 6.9―11.8 N·m (kgf·m, ft·lbf) (0.7―1.2, 5.1―8.7) Front side marker lights NOTE l l l To replace the bulb, contact an Authorized Mazda Dealer. If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Use the protective cover and carton for the replacement bulb to dispose of the old bulb promptly and out of the reach of children. Front turn signal lights Front side marker lights, Front turn signal lights 1. Make sure the headlight switch is off. 2. Lift the hood. 3. Remove the attachment bolts and the coolant reservoir before replacing the light bulb. 6. Install the new bulb in the reverse order of removal. 7. Install the coolant reservoir. If you are unsure of how tight the bolts should be, have them inspected at an Authorized Mazda Dealer. Bolt tightening torque 6.9―11.8 N·m (kgf·m, ft·lbf) (0.7―1.2, 5.1―8.7) Fog lights í 4. Turn the socket and bulb assembly counterclockwise and remove it. 5. Remove the bulb by pushing it in slightly and turning it counterclockwise. 1. Make sure the headlight switch is off. 2. Turn the screws counterclockwise and remove them. 8-40 í Some models. Form No.8V83-EA-06I