2004 Mercedes E-Class Owner's Manual - Page 323

Practical hints What to do if ... Display ESP Display message not available! See Operator's Manual Possible cause The ESP is deactivated because of a malfunction or interrupted power supply. The SBC brake system is still functioning normally. Possible solution Synchronize the ESP. With the vehicle stationary, turn the steering wheel completely to the left and then to the right to synchronize the ESP. If the ESP message does not go out: Continue driving with added caution. Visit an authorized Mercedes-Benz Center as soon as possible. Failure to follow these instructions increases the risk of accident. P Gear selector lever in P You have turned off the engine with Place the gear selector lever in position P. the KEYLESS-GO* start/stop button* and opened the driver's door. P/N Shift to N or P You have attempted to start the engine with the KEYLESS-GO* start/stop button while the gear selector lever was in position R or D. Place the gear selector lever in position P or N. 323