1998 Mercury Sable Owner Guide 1st Printing - Page 163
1998 Mercury Sable Manual
Page 163 highlights
Maintenance and care License plate lamp bulbs To change the license plate bulbs: Sedan 1. Remove two screws and the license plate lamp assembly from the rear bumper. 2. Remove bulb socket by turning counterclockwise . 3. Carefully pull the bulb out from the socket and push in the new bulb. 4. Install the lamp assembly on rear bumper with two screws. Wagon 1. Remove screw and the license plate lamp assembly from liftgate. 2. Remove bulb socket by turning counterclockwise . 3. Carefully pull the bulb out from the socket and push in the new bulb. 4. Install the lamp assembly on liftgate with screw. Replacing front parking lamp/turn signal bulbs For bulb replacement, see a dealer or qualified technician. Replacing tail lamp/backup bulbs For bulb replacement, see a dealer or qualified technician. 163