2003 Mercury Mountaineer Owner Guide 3rd Printing - Page 31
2003 Mercury Mountaineer Manual
Page 31 highlights
Climate Controls Climate Controls MANUAL HEATING AND AIR CONDITIONING SYSTEM 1. Temperature selection: Controls the temperature of the airflow in the vehicle. 2. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control. MAX A/C: Uses recirculated air through the instrument panel registers to cool the vehicle. This mode is more noisy than A/C, but is more economical and efficient and may help prevent undesirable odors from entering the vehicle. : Distributes outside air through the instrument panel vents. O (OFF): Outside air is shut out and the fan will not operate. : Distributes outside air through the floor vents. : Distributes outside air through the windshield defroster vents and floor vents. : Distributes outside air through the windshield defroster vents. 3. A/C: Uses outside air to cool the vehicle. Air flows from the instrument panel register vents only. 4. Rear Defrost: Clears ice and fog from the rear windshield. 5. Fan speed adjustment: Controls the volume of air circulated in the vehicle. Operating tips • To reduce fog build up on the windshield during humid weather, place the air flow selector in the position. • To reduce humidity build up inside the vehicle: do not drive with the air flow selector in the OFF or MAX A/C position. • Under normal weather conditions, do not leave the air flow selector in MAX A/C or OFF when the vehicle is parked. This allows the vehicle to "breathe" using the outside air inlet vents. • Do not put objects under the front seats that will interfere with the airflow to the back seats. • Remove any snow, ice or leaves from the air intake area at the base of the windshield. 31