2005 Mercury Montego Owner's Manual - Page 132

Tires, Wheels and Loading Increasing the inflation pressure beyond this pressure will not increase the tire's load carrying capability. kPa: Kilopascal, a metric unit of air pressure. PSI: Pounds per square inch, a standard unit of air pressure. Cold inflation pressure: The tire pressure when the vehicle has been stationary and out of direct sunlight for an hour or more and prior to the vehicle being driven for 1 mile (1.6 km). Recommended inflation pressure: The cold inflation pressure found on the tire label located on the B-Pillar or the edge of the driver's door. B-pillar: The structural member at the side of the vehicle behind the front door. Bead area of the tire: Area of the tire next to the rim. Sidewall of the tire: Area between the bead area and the tread. Tread area of the tire: Area of the perimeter of the tire that contacts the road when mounted on the vehicle. Rim: The metal support (wheel) for a tire or a tire and tube assembly upon which the tire beads are seated. INSPECTING AND INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required. At least once a month and before long trips, inspect each tire and check the tire pressure with a tire gauge (including spare, if equipped). Inflate all tires to the inflation pressure recommended by Ford Motor Company. Inspecting your tires Periodically inspect the tire treads for uneven or excessive wear and remove stones, nails, glass or other objects that may be wedged in the 132 2005 Montego (mgo) Owners Guide (post-2002-fmt) USA_English (fus)