2006 Mercury Mountaineer Owner Guide 2nd Printing (Spanish) - Page 415

Climate Controls 15. Fan Speed: Manually increases or decreases the fan speed. EXT 16. EXT: Displays the outside air temperature. It will remain displayed until the EXT control is pressed again. The external temperature will be most accurate when the vehicle has been moving for a period of time. FC 17. Temperature conversion: Press to toggle between Fahrenheit and Celsius temperature on the DATC display only. The set point temperatures in Celsius will be displayed in half-degree increments. Operating tips • To reduce fog build up on the windshield during humid weather, place position. the air flow selector in the • To reduce humidity build up inside the vehicle, do not drive with the air flow selector in OFF or with recirculated air engaged. • Do not put objects under the front seats that will interfere with the airflow to the rear seats. • Remove any snow, ice or leaves from the air intake area at the base of the windshield. • To improve the A/C cool down, drive with the windows slightly open for 2-3 minutes after start up or until the vehicle has been "aired out." For maximum cooling performance: • Select and A/C and recirculated air. Use recirculated air with A/C to provide a cooler airflow. • Move the temperature control to the coolest setting. To allow side window defogging and demisting while warming up the vehicle cabin: . 1. Select 2. Select A/C. 3. Set the temperature control to maintain comfort. 4. Set the fan speed to the highest setting. 5. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel. 45 2006 Mountaineer (mnt) Owners Guide (post-2002-fmt) USA (fus)