2008 Mercury Grand Marquis Owner Guide 1st Printing - Page 45

Lights Overhead console lamps To remove and replace the lamps in the overhead console: 1. Make sure the headlamp switch is in the OFF position and remove the overhead console from the headliner by pulling it straight down. 2. Remove the bulb socket from the back of the lamp housing by pulling it straight out. 3. Remove the bulb from the socket by pulling straight out. Install the new bulb in reverse order. Replacing exterior bulbs Check the operation of all the bulbs frequently. Replacing headlamp bulbs To remove the headlamp bulb: 1. Make sure the headlamp control is in the OFF position, then open the hood. 2. Remove the three pin type retainers and the radiator sight shield. 3. Remove the front parking lamp assembly, refer to Replacing front parking/cornering/turn signal lamp in this section. 4. Remove the headlamp retainer bolts and the headlamp assembly. 5. Disconnect the electrical connector. 45 2008 Grand Marquis (grn) Owners Guide (post-2002-fmt) USA (fus)