2009 Mercury Sable Owner's Manual - Page 106

Locks and Security Activating the memory feature To activate this feature: 1. Position the seat, mirrors and adjustable pedals to the desired positions. 2. Press and hold either the 1 or 2 control on the driver's door for five seconds. (A tone will be heard after 11⁄2 seconds when the memory store is done) continue to hold until a second tone is heard after five seconds. 3. Within three seconds press the on the transmitter. 4. A tone will be heard when the activation is complete. 5. Repeat this procedure for another transmitter if desired. Deactivating the memory feature To deactivate this feature: 1. Press and hold either the 1 or 2 control on the driver's door for five seconds. (A tone will be heard after 11⁄2 seconds when the memory store is done) continue to hold until a second tone is heard after five seconds. 2. Within three seconds press the on the transmitter. 3. A tone will be heard when the deactivation is complete. 4. Repeat this procedure for another transmitter if desired. Replacing the battery The Integrated Keyhead Transmitter uses one coin type three-volt lithium battery CR2032 or equivalent. To replace the battery: 1. Twist a thin coin in the slot of the IKT near the key ring in order to remove the battery cover. 106 2009 Sable (mgo) Owners Guide, 2nd Printing USA (fus)