2004 Nissan Sentra Owner's Manual - Page 118

APS (Automatic Program Search) FF, APS REW When the button is pushed while the compact disc is playing, the selection following the present one starts to play from the beginning. Push the button several times to skip several selections. Each time the button is pushed, the CD advances one selection. (When the last selection on the compact disc is skipped, the first selection is played.) button is pushed, the selection When the being played returns to the beginning. Push the button several times to skip back several selections. Each time the button is pushed, the CD moves back one selection. Repeat button When the button is pushed while the compact disc is playing, the play pattern changes as follows: 1: The current selection is repeated. Normal (no symbol): All selections are played in sequence. When a new compact disc is inserted, the play pattern automatically changes to the "Normal" play pattern. MIX button When the button is pushed while the compact disc is playing, the play pattern changes as follows: RANDOM: Selections are played at random, not following the sequence on the compact disc. The same program may be repeated twice. Normal (no symbol): All selections are played in sequence. When a new compact disc is inserted, the play pattern automatically changes to the "Normal" play pattern. CD EJECT button When the button is pushed with a compact disc loaded, the compact disc ejects. When the button is pushed while the compact disc is playing, the compact disc ejects and the system turns off. DISC indicator light CD IN appears in the display when a CD is loaded with the system ON. LHA0049 CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. ● Do not use a conventional record cleaner or alcohol intended for industrial use. ● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. 4-16 Heater, air conditioner and audio systems