2014 Nissan Rogue Owner's Manual - Page 319

If the system cancels and a message appears with a beep sound, pull off the road to a safe location, stop the vehicle and turn the engine off. Check to see if the sensor area of the front bumper is blocked. If the sensor area of the front bumper is blocked, remove the object blocking and restart the engine. If the sensor is malfunctioning, have the system checked by a NISSAN dealer. How to enable/disable the FCW system Perform the following steps to enable or disable the FCW system. button until "Settings" dis1. Press the plays in the vehicle information display. Use button to select "Driver Assisthe tance". Then press the ENTER button. 2. Select "Driver Aids", and press the ENTER button. LIC2727 Forward Collision Warning light 3. To set FCW system to on or off, use the ↑↓ buttons to navigate in the menu and use the ENTER button to select or change item: ● To turn on the warning use the ENTER button to check box for "Forward." ● To turn off the warning use the ENTER button to clear box for "Forward." - The FCW light will illuminate on the Vehicle Information Display when the system is on. FCW SYSTEM OPERATION The FCW system is active at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on. When FCW is turned on, FCW Indicator (white) will turn on. FCW system is activated using the settings menu on the information display. See "How to enable/disable the FCW system" using the settings menu in this section. 5-34 Starting and driving