1999 Oldsmobile Aurora Owner's Manual - Page 11

yellowblue If you prefer to program the transmitter to the exit seat position, which moves the seat completely down and back, follow these steps: 1. Press the SET button on the driver's door panel. You will hear one beep. 2. Press one of the memory buttons on the driver's door panel. You will hear one beep, but the seat will not move at this time. 3. Press the UNLOCK button on the appropriate transmitter within five seconds. You will hear two beeps. This personalization feature will work only when the vehicle is in PARK (P). A beep will sound inside the vehicle when the UNLOCK button on the transmitter is pressed to move the seat and mirrors. To turn this feature off, press SET and then UNLOCK within five seconds. This feature will quickly heat the lower cushions and lower back of the driver and front passenger seats for added comfort. Press the button once to turn the heater on high. The HI indicator light below the button will glow. Press it again to turn the heater on low. The LO indicator light below the button will glow. Press it a third time to turn the heater off. The heater will turn off automatically when the ignition is turned to OFF. Heated Front Seat (Option) 1-5