2002 Oldsmobile Intrigue Owner's Manual - Page 101

Flash-to-Pass Feature With the lever in the low-beam position, pull the lever toward you momentarily to switch to high beams (to signal you are going to pass). If you have the headlamps on, they will return to low beams when you release the lever. Windshield Wipers INT (Intermittent): Move the lever to INT to choose a delayed wiping cycle. Turn the INT ADJ band down for a longer delay or up for a shorter delay. The further the INT ADJ band is turned upward, the shorter the delay will be and the further the INT ADJ band is turned downward, the longer the delay will be. The wiper speed can only be adjusted when the lever is in the INT position. Use this position for light rain or snow. LO (Low Speed): Move the lever up to the first setting past INT, for steady wiping at low speed. HI (High Speed): Move the lever up to the second setting past INT, for steady wiping at high speed. MIST: Move the lever all the way down to MIST for a single wiping cycle. Hold it there until the windshield wipers start; then let go. The windshield wipers will stop after one wipe. If you want more wipes, hold the band on MIST longer. Heavy snow or ice can overload the wipers. If this occurs, a circuit breaker will stop the wipers until the motor cools. So, be sure to clear any ice and snow from the windshield wiper blades before using them. If the wiper blades are frozen to the windshield, carefully loosen them, or warm the windshield before turning the wipers on. If your blades do become worn or damaged, get new blades or blade inserts. Use this lever located on the right side of the steering wheel to operate the windshield wipers. OFF: Move the lever to OFF to turn off the windshield wipers. 2-37