2003 Oldsmobile Silhouette Owner's Manual - Page 121
2003 Oldsmobile Silhouette Manual
Page 121 highlights
Automatic Transaxle Operation If you cannot shift out of PARK (P), ease pressure on the shift lever - push the shift lever all the way into PARK (P) as you maintain brake application. Then move the shift lever into the gear you wish. See Shifting Out of Park (P) on page 2-42. Maximum engine speed is limited when you're in PARK (P) or NEUTRAL (N), to protect driveline components from improper operation. There are several different positions for your shift lever PARK (P): This gear position locks your front wheels. It's the best position to use when you start your engine because your vehicle can't move easily. Ensure the shift lever is fully in PARK (P) before starting the engine. Your vehicle has an automatic transaxle shift lock control system. You haveto fully apply your regular brakes before you can shift from PARK (P) when the ignition key is in RUN. As you step on the brake pedal, while in PARK (P), you may hear a click from the solenoid of the system. This ensures that the system is operating properly. It is dangerous to get outof your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. Don't leave your vehicle when the engine is running unless you have to. If you have left the engine running,the vehicle can move suddenly. You or others could be injured. be sure your To vehicle won'tmove, evenwhen you're on fairly level ground, always set your parking brake and move theshift lever toPARK (P). See "Shifting in Into Park (P)" the Index. If you'repulling a trailer, see "Towing a Trailer" the in Index. 2-36