2002 Pontiac Bonneville Owner's Manual - Page 166

DIC Personalization Programming The DIC can be used to program the following personalization features available with your vehicle: D D D D D D D D Automatic Door Locks Window Lockout Security Feedback Delayed Locking Perimeter Lighting Memory Seats Parallel Park Assist Mirror (Tilt Mirror) Driver ID When you press the button with the unlock symbol on your transmitter, the DIC will automatically change driver numbers and the vehicle will recall the personalization settings that were last made to correspond to your transmitter, including your radio and comfort control settings. See "Comfort Controls Personalization" in the Index. If you unlock the vehicle using your door key instead of your transmitter, the DIC will not change drivers and will recall the information from the last transmitter use or the last driver change using the memory seat controls. If this happens and you were not the last driver of the vehicle, simply press your correct driver number on the memory seat controls or press the button with the unlock symbol on your transmitter or select the personalization programming mode and choose the correct driver number. Use the following steps for personalization programming instructions. 1. Turn the ignition on and keep the transaxle in PARK (P). 2. Press the MODE button to reach personalization programming display. The DIC is used to program the personal choices of two drivers. The drivers are recognized as DRIVER #1 and DRIVER #2. You will let the DIC know which driver you are by using your remote keyless entry transmitter or by pressing the appropriate memory seat control button located on the driver's door or by choosing the driver with the DIC. Each remote keyless entry transmitter was preprogrammed to belong to DRIVER #1 or DRIVER #2. Each transmitter may be programmed differently for each driver. 2-103