2005 Saturn VUE Owner's Manual - Page 294

Center High-Mounted Stoplamp (CHMSL) To replace a CHMSL bulb, do the following: 7. Replace the old bulb with a new one. 8. Align the tabs on the CHMSL lens with the CHMSL bulb assembly, and push to install. 9. Reverse Steps 1 through 4 to reinstall the CHMSL assembly. Taillamps, Turn Signal, Stoplamps and Back-up Lamps To replace one of these bulbs, do the following: 1. Remove the taillamp fasteners from the body of the vehicle. 2. Slide the taillamp housing rearward and away from the body of the vehicle. 1. Remove the center high-mounted stoplamp (CHMSL) fasteners. 2. Pull the CHMSL out of the liftgate. 3. Disconnect the rear washer hose from the rear washer nozzle. 4. Disconnect the electrical connector from the CHMSL assembly. 5. Depress the tabs on the CHMSL lens to separate the CHMSL bulb from the CHMSL lens. 6. Pull the CHMSL bulb out of the assembly. 5-52