2007 Saturn VUE Owner's Manual - Page 328

Automatic Transaxle Fluid (3.5L V6 Engine) When to Check and Change Automatic Transaxle Fluid A good time to check your automatic transaxle fluid level is when the engine oil is changed. Change the fluid at the intervals listed in Additional Required Services on page 423, and be sure to use the transaxle fluid listed in Recommended Fluids and Lubricants on page 432. Notice: Too much or too little fluid can damage the transaxle. Too much can mean that some of the fluid could come out and fall on hot engine or exhaust system parts, starting a fire. Too little fluid could cause the transaxle to overheat. Be sure to get an accurate reading if you check the transaxle fluid. Wait at least 30 minutes before checking the transaxle fluid level if you have been driving: • When outside temperatures are above 90°F (32°C). • At high speed for quite a while. • In heavy traffic - especially in hot weather. • While pulling a trailer. To get the right reading, the fluid should be at normal operating temperature, which is 180°F to 200°F (82°C to 93°C). Get the vehicle warmed up by driving about 15 miles (24 km) when outside temperatures are above 50°F (10°C). If it is colder than 50°F (10°C), you may have to drive longer. How to Check Automatic Transaxle Fluid Because this operation can be a little difficult, you may choose to have this done at your retailer's service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick. 328