2011 Subaru Impreza Owner's Manual - Page 148

Instruments and controls 3-27 & Select lever/gear position indicator (AT models) & Turn signal indicator lights These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible. Refer to "Replacing bulbs" F11-48. & High beam indicator light This light shows that the headlights are in the high beam mode. This indicator light also illuminates when the headlight flasher is operated. control indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the "Acc" or "LOCK" position, and then turn it again to the "ON" position. . If this indicator light and the CHECK ENGINE warning light/malfunction indicator lamp flash simultaneously during driving, have the vehicle checked by your nearest SUBARU dealer. & Cruise control set indicator light The cruise control set indicator light illuminates when the ignition switch is turned to the "ON" position and turns off after approximately 3 seconds. This light illuminates when vehicle speed has been set. When the ignition switch is turned to the "ON" position, all of the select lever/gear position indicators illuminate for 2 seconds, and then the indicator shows the position of the select lever. When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the upshift/ downshift indicator light up. Refer to "Automatic transmission" F7-22. & Cruise control indicator light The cruise control indicator light illuminates when the ignition switch is turned to the "ON" position and turns off after approximately 3 seconds. This light illuminates when the "CRUISE" main switch is pressed. & Front fog light indicator light (if equipped) This indicator light illuminates while the front fog lights are illuminated. NOTE . If you press the "CRUISE" main switch button while turning the ignition switch "ON", the cruise control function is deactivated and the cruise & Headlight indicator light (if equipped) This indicator light illuminates when the " or headlight switch is placed in the position. - CONTINUED -