2010 Toyota Sequoia Navigation Manual
2010 Toyota Sequoia Manual
2010 Toyota Sequoia manual content summary:
- 2010 Toyota Sequoia | Navigation Manual - Page 1
CUSTOMER EXPERIENCE CENTER 1-800-331-4331 TUNDRA SEQUOIA & 2 0 1 0 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A. 4/09 08-TCS-03060 00505-NAV10-TSS 2010 Tundra CrewMax Limited Tundra Double Limited Sequoia (all models) - 2010 Toyota Sequoia | Navigation Manual - Page 2
to provide information on the basic operation and key features of the navigation system. The Quick Reference Guide is not intended as a substitute for the Navigation Owner's Manual. We strongly encourage you to review the Navigation Owner's Manual so you will have a better understanding of the - 2010 Toyota Sequoia | Navigation Manual - Page 3
Button Repeat the last voice guidance prompt, cancel the map scrolling feature, or display the current position. DESTINATION Button Input the destination VEHICLE POSITION Mark Indicates the current position of the vehicle and its directional heading. NORTH-UP OR COMPASS MODE Icon Touch to change the - 2010 Toyota Sequoia | Navigation Manual - Page 4
Press the DEST panel button followed by . step 2 and move Touch to step 4. To change Search Area, touch and move to step 3. step 3 Select the desired Search Area and fixes such as North or the letter N. The system will display the base street name without prefixes or suffixes on the next screen. - 2010 Toyota Sequoia | Navigation Manual - Page 5
DESTINATION INPUT BY ADDRESS step 7 Touch the desired street name. step 8 Input the house number and . touch step 9 Touch . step 10 Select the desired Route Preferences by touching followed by . Touch to confirm selection. step 11 Touch guidance. to start route 4 - 2010 Toyota Sequoia | Navigation Manual - Page 6
The navigation system's voice recognition feature will compare your spoken words with computer-generated word patterns preprogrammed in the database. If the system does not provide your intended match, please try a different pronunciation. Voice-activation names are not available for every - 2010 Toyota Sequoia | Navigation Manual - Page 7
DESTINATION INPUT BY ADDRESS-VOICE RECOGNITION step 3 After the beep say the city name or, "Change state" to search in another state. step 4 After the beep say the street name. step 5 After the beep say the house number. step 6 After the - 2010 Toyota Sequoia | Navigation Manual - Page 8
step 3 Input the POI name and touch . step 4 or to scroll up Use or down. Touch the desired destination. Quick Tip - If the POI isn't listed in the database verify the spelling and Search Area for accuracy. step 5 Touch . step 6 Quick Tip - Touching next to the POI name will display the - 2010 Toyota Sequoia | Navigation Manual - Page 9
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY step 1 Press the DEST panel button followed by . step 2 Touch . step 3 Touch the desired category location. step 4 Touch the desired category icon followed by the desired sub-category. step 5 Use or to scroll - 2010 Toyota Sequoia | Navigation Manual - Page 10
prompt. Speak your command after the beep. step 3 After the beep say, "Near Here." step 4 After the beep say, "Hotels." See page 22 for the list of recognized POI categories in addition to those displayed on the screen. step 5 After the beep say the number that corresponds to the desired - 2010 Toyota Sequoia | Navigation Manual - Page 11
SET HOME step 1 Press the SETUP panel button . followed by step 2 Touch . step 3 Touch . step 4 Touch . Tip - For security reasons, use a point close to your home instead of your actual home address. step 5 Make sure you are in the desired Search Area. Touch . step 6 Input the - 2010 Toyota Sequoia | Navigation Manual - Page 12
Enter the street name without prefixes such as North or the letter N. The system will display the base street name without prefixes or suffixes on the next 10 Input the house number and touch . step 11 Touch followed to change the by home icon. step 12 Touch the desired icon for your home. - 2010 Toyota Sequoia | Navigation Manual - Page 13
www.Toyota.Letstalk.com. step 3 Input the passkey listed on the screen into the approved Bluetooth cell phone. Please refer to the cell phone manufacturer's user guide for pairing procedures. step 4 Upon connection, the system will indicate that the pairing process was successful. Quick - 2010 Toyota Sequoia | Navigation Manual - Page 14
on the steering press wheel. Some Bluetooth® equipped cell phones may or may not show battery or signal strength on the display. Quick Tip - A noisy environment may prevent the voice recognition system from understanding your commands. It is recommended that you reduce background noise (including - 2010 Toyota Sequoia | Navigation Manual - Page 15
, or are unable to transfer your cell phone book, please refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for command after the beep. step 3 After the beep say the name from the contact list. step 4 After the beep, say "Dial" or press on the steering wheel. - 2010 Toyota Sequoia | Navigation Manual - Page 16
is the most direct based upon driven mileage. The system does not account for traffic signals or traffic flow. Single Sing gle Map * Turn List Dual Map * Arrow Compass Touch to select from seven different screen viewing options. Four screen preferences are available when the map is visible and - 2010 Toyota Sequoia | Navigation Manual - Page 17
CHANGE VOICE RECOGNITION GUIDANCE PRESS SETUP PANEL BUTTON > PRESS SETUP PANEL BUTTON > Once the screen transition is switched off, the audio screen will remain without reverting to the map display. Disables system guidance for voice commands. Only on-screen guidance will be available - 2010 Toyota Sequoia | Navigation Manual - Page 18
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME - 2010 Toyota Sequoia | Navigation Manual - Page 19
system to display traffic information. Traffic events and flow data are updated 12 times each hour from a variety of sources. XM NavTraffic® service is available in 80 major metropolitan areas across the continental US with more to come. New TUNDRA and SEQUOIA . Accidents and disabled vehicles. 18 - 2010 Toyota Sequoia | Navigation Manual - Page 20
the preference has been selected. Touch , traffic flow is displayed by colored lines alongside freeways or highways: Free flow traffic Moderate traffic Heavy Select Avoid Traffic option. Touch followed by . The system will automatically select another route when moderate or heavy traffic is detected - 2010 Toyota Sequoia | Navigation Manual - Page 21
XM NAVTRAFFIC ® XM NAVTRAFFIC ® PREFERENCES TRAFFIC VOICE GUIDANCE step 1 Press the SETUP panel button followed by . step 2 to display Traffic Voice Touch Guidance option on page 2. Select to receive voice notification of traffic events within 20 miles along the current route. followed by Touch . - 2010 Toyota Sequoia | Navigation Manual - Page 22
recognition feature. After the beep, say one of the voice commands shown on the screen or listed below. Please refer to the Navigation Owner's Manual for Map Single Map Compass Mode Arrow Mode Turn List Mode Freeway Mode Intersection Mode CHANGE ROUTE Quick Route Short Route Alternate Route Detour - 2010 Toyota Sequoia | Navigation Manual - Page 23
Resorts Sports Complexes Sports & Fitness Automotive Automobile Clubs Auto Service & Maint. Car Rental Agencies Car Washes Dealerships Gas Lexus Parking Parts Stores Roadside Assistance Toyota Other Automotive Banks ATMs Full-Service Banks City Centers City Centers Government Libraries Post Offices - 2010 Toyota Sequoia | Navigation Manual - Page 24
Initial screen D Touch screen operation D Inputting letters and numbers/List screen operation D Screen adjustment D Function help D Map map ...Map icons ...D Speech command system Command list ... 1 26 27 28 31 33 33 33 34 39 42 42 43 44 44 47 25 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 25
is in the "ACC" or "ON" position, the initial screen will be displayed and the system will begin operating. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds, the "CAUTION" screen will be displayed. After about 5 seconds - 2010 Toyota Sequoia | Navigation Manual - Page 26
components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in operation. This system is operated mainly - 2010 Toyota Sequoia | Navigation Manual - Page 27
. On certain letter entry screens, letters can be entered in upper or lower case. : To enter in lower case. : To enter in upper case. 28 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 28
matches is five or less, the list is displayed without touching "OK". INFORMATION The number of matching items is shown to the right side of the screen. If the number of matching items is more than 999, the system displays "∗∗" on the screen. 29 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 29
to the next or previous page. Touch or to scroll through 1. Touch "Sort". the displayed list. This expresses a displayed screen position. 2. Select the desired sorting criteria. Sorting criteria are as scroll to the beginning of the name. 30 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 30
display screen back on, push the "DISP" button again, or push the "DEST" or another screen mode button. U003ADNS 1. Push the "DISP" button. INFORMATION When you do not touch any button on the "Display" screen for 20 seconds, the previous screen will be displayed. 31 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 31
Depending on the position of the headlight switch, the screen changes to day mode or night mode. Color and tone adjustment (with rear seat entertainment system) 1. Touch the desired button to adjust color and tone. You can adjust the color and the tone while the DVD video and video CD are being - 2010 Toyota Sequoia | Navigation Manual - Page 32
. INFORMATION D After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see page 251. 33 2010 SEQUOIA Navigation from April - 2010 Toyota Sequoia | Navigation Manual - Page 33
When the one−touch scroll feature is used, the current vehicle position mark may disappear from the screen. Move the map with a one−touch scroll again or push the "MAP/VOICE" button to return to the current vehicle position map location display. 34 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 34
to register more than 100 address book entries, an error message will appear. Touch "Mark". When you touch "Mark", the following screen appears for a few seconds, and then the map screen returns. The registered point is shown by map. on the 35 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 35
"Go to ": To delete the existing destinations and set a new one. "Add to Route": To add a destination. To register this POI as an address book entry, touch "Mark". (See page 109.) If is touched, the registered telephone number can be called. 36 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 36
can be displayed on the map screen. (See " - Display POI icons" on page 92.) ADDRESS BOOK ENTRY INFORMATION When the cursor is set on an address book entry icon, the name and "Info." are displayed at the top of the screen. Touch "Info.". 37 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 37
book entry, touch "Delete". is touched, the registered teleIf phone number can be called. Information such as the name, address, and phone number are displayed. To delete a destination, touch "Delete". is touched, the registered teleIf phone number can be called. Touch "Info.". 38 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 38
XMr NavTraffic icon on the map, the XMr NavTraffic info. bar will appear on the upper part of the screen. Any one of the screen configurations can be selected . 1. Touch this button screen configuration, touch one of the following buttons. 39 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 39
screen. (See page 41.) : To display the freeway screen. (See page 78.) : To display the turn list screen. (See page 80.) : To display the arrow screen. (See page 80.) : To display the intersection map screen. The screen shows the single map. 40 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 40
map screen. COMPASS MODE Current vehicle position is indicated with a Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 98.) 4. Changing the orientation of the map Touch "OK" when you complete editing. The screen returns to the dual map screen. 41 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 41
shown. When the map scale is at the minimum range of 150 feet (50 m), is not shown. In areas where the foot print map is available the map scale changes from to when at the minimum range. 42 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 42
Information is available only for buildings for which information is recorded on the map disc. The orientation of the map can be changed from North vehicle travel, North is always up. Heading−up symbol The direction of vehicle travel is always up. A red arrow indicates North. 43 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 43
a command. U004ADNS " Type A U026ADNS " Type B 1. Push the talk switch. After a beep sounds, the "Voice Menu" screen is displayed. INFORMATION Voice guidance for the speech command system can be skipped by pushing the talk switch. 44 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 44
screen. If you want to check the command list, say "Command list" to display the command list screen. (See "-Command list" on page 47.) 3. Following voice guidance, say the command displayed on the screen. If a desired outcome is not shown, or if no choices are available, say "Go back" or touch "Go - 2010 Toyota Sequoia | Navigation Manual - Page 45
return to the "Voice Menu" screen, say "Go back" or touch "Go Back". Touch "Cancel" or say "Cancel", and the speech command system will be canceled. " Microphone (Type B) It is open D Passengers are talking while voice commands are spoken 46 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 46
wind noise, etc. 2. Say "Command list". 3. Say the command of your choice to operate the system. To confirm commands on the screen, touch or to scroll through the command list. This function is available only when the vehicle is not moving. 47 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 47
confirm commands on the screen, touch or to scroll through the command list. This function is available only when the vehicle is not moving. When or is touched, push the talk switch again and say the command. The screen shows the dual map. 48 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 48
on the screen, touch or to scroll through the command list. This function is available only when the vehicle is not moving. When or is touched, push the talk switch again and say the command. The scale of the map display is changed. 49 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 49
BASIC FUNCTIONS 50 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 50
Book" ...Destination search by "Emergency" ...Destination search by "Intersection & Freeway" ...Destination search by "Map" ...Destination search by "Coordinates" ...Deleting set destinations ...D Starting route guidance 2 52 52 54 54 55 59 65 66 66 67 70 71 71 72 51 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 51
touch screen button may be slow. 2. Touch one of "US1" through "CAN" to select a region to search. 3. Touch "OK" and the previous screen returns. 52 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 52
Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search region All provinces and regions in Canada included in this button. "US4" "US5" "US6" "US7" "US8" 53 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 53
the preset destination touch screen buttons on the "Destination" screen. The screen changes and displays the map location of the preset destination point and the route the current vehicle position to the preset destination point if "Go to " is touched even while driving. 54 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 54
"Destination" screen. 3. Touch "City". 3. Touch the button for the desired method. 4. Input a city name. 5. Touch the button of the desired city name from the displayed list. 55 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 55
button. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) If the same address exists in more than one city, the current screen changes to the address list screen. 56 2010 SEQUOIA Navigation from April - 2010 Toyota Sequoia | Navigation Manual - Page 56
the button of the desired city name. If the navigation system has never been used, this function will not be available. The current screen changes to the screen for inputting a street name. (See name. 5. Input the street name and touch "OK". 57 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 57
found, touch the corresponding button. The screen changes and displays the map location of the selected list. INFORMATION You can search for a street name using just the body. Example : S WESTERN AVE You can input "S WESTERN AVE", "WESTERN AVE" or "WESTERN" 7. Input a city name. 58 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 58
Interest. 5. Touch the button of the desired destination. The screen changes and displays the map location of the selected destination and the route list screen is displayed. INFORMATION To search for a facility name using multiple search words, put a space between each word. 59 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 59
the map screen. (See " - Display POI icons" on page 92.) 2. Input the city name. 3. Touch the button of the desired city name from the displayed list. INFORMATION To cancel the city setting, touch "Any City". 60 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 60
on the screen, touch "List All Categories" to list all POI categories. Set the search point by the following method: 1. Set the search point from near the vehicle's current position 2. Set is touched, the POI name list screen is displayed. 61 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 61
the button of the desired city center name. The search point is set and the "POI Category" screen will be displayed. (See page 64.) 62 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 62
the button of the desired city center name. The search point is set and the "POI Category" screen will be displayed. (See page 64.) 63 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 63
. Select the desired POI category from the list. By touching the button of the desired item, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 64 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 64
, see page 119.) The screen changes and displays the map location of list of previous destinations can also be deleted by touching "Delete Previous Dest." on the "Navigation Settings" screen when the vehicle is stopped. (See " - Deleting previous destinations" on page 119.) 65 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 65
address book. (See page 108.) The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 3. Touch the desired emergency category. The selected emergency category list is displayed. 66 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 66
destination and the route preference. (See "Starting route guidance" on page 72.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 309.) 3. Touch the button for the desired method. 67 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 67
item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 6. Touch the button of the desired item. 68 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 68
Freeway" screen. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city 5. Select the desired freeway by touching the button. 69 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 69
However, the cursor cannot be moved. 9. Touch the button of the desired entrance or exit name. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 72.) 70 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 70
"Destination" screen. When more than one destination is set, a list will be displayed on the screen. 3. Input the latitude and the the button of the desired point, the screen changes and displays the map location of the selected destination 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 71
Starting route guidance The system searches for the guidance route again, and displays the entire route. After inputting the destination, the screen changes and displays the map it to view items such as name, address, and phone number. 72 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 72
the destination. CAUTION Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may provide incorrect information. 73 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 73
the destination in the shortest distance. This route is indicated by a green line. "Info.": To display the following information about each of the 3 routes. 74 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 74
route guidance shows a sea route. After you travel by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically on the conditions which the system uses to determine the route to the destination. (See page 89) 75 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 75
DESTINATION SEARCH 76 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 76
83 84 84 84 85 86 86 87 89 91 92 Display POI* icons ...92 Route trace ...96 D XM NavTraffic 98 ∗: Point of Interest 77 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 77
and travel/arrival time to the destination Current position Guidance route INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For some or exits. : To scroll for the closest 3 junctions or exits. 78 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 78
for the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. Next street VOICE" button, the intersection guidance screen reappears. 79 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 79
of turns on the guidance route can be viewed. Touching ance displays the turn list. during guid- ARROW SCREEN On this screen, information about next turns on the guidance route can Turn direction Distance to the next turn Current street name 80 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 80
voice guidance provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.5 miles 4.7 miles 0.5 miles 1 2 1 2 3 4 "Proceed about 4 miles to order to allow time to maneuver. 81 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 81
turn." "Make a legal U−turn ahead." (Beep sound only) INFORMATION D If the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made "D Voice volume" on page 244. 82 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 82
speed information. (See page 247.) However, when the vehicle is not on the guidance route, the distance is the linear distance between the current position and the destination. 2. Touch the number button to display the desired destination. 83 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 83
3. Select the desired destination and press "Move Up" or "Move Down" to change the arrival order. 4. Touch "OK". 5. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. 84 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 84
recovered. If "No" is touched, the previous screen will return. The system searches for the guidance route again, and displays the entire route. 1. Touch list. "Unselect All": To unselect all of the selected destinations. A message appears to confirm the request to delete. 85 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 85
setting While the route guidance is operating, you can change the route to detour around a section of the route system will search for the route based on the traffic congestion information received from XMr NavTraffic. For details, see "XMr NavTraffic" on page 98. 2. Touch "Detour". 86 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 86
Touch "Overview". The entire route from the current position to the destination is displayed. "OK": To start guidance. "Turn List": The following screen displays the list of the roads up to the destination. "Preview": To preview the route. 87 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 87
list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list Turn List" screen. The point which you choose is displayed on the map screen. 2. Touch "Overview". 3. Touch "Preview". 88 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 88
in fast−forward mode. : To indicate the previous destination or starting point. 2. Touch "Preferences". 1. Touch "Route". 3. Touch "Quick", "Short" or "Alternate" and touch "OK". 89 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 89
" to change the conditions that determine the route to the destination. 3. Select the desired route preference by touching the button. When searching for a route, the system will avoid routes when the indicator is off. 4. After choosing the desired route preference, touch "OK". 90 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 90
from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) D To pause guidance 1. Touch "Route". 1. Touch "Route to the current position map without route guidance. 91 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 91
map screen have already been set, "Change POI" is displayed. The screen will change to the current position map with route guidance. A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 250.) 92 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 92
Point of Interest, touch this button. Then choose one of the categories. The system will list the points within 200 miles (320 km). (See page 94.) Select the desired on the screen, touch "List All Categories" to list all POI categories. 93 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 93
miles (320 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of near the current position or along the route. 94 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 94
the list of Points of Interest near vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route preference. (See "Starting route guidance" on page 72.) 95 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 95
the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). 1. Touch "Show on Map Icons" on the "Show on Map" screen. 96 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 96
displayed. Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is erased. 97 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 97
is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show Free Flowing Traffic" will not operate. D Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XMr Satellite Radio. 98 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 98
is displayed on the map. 1. Touch "Show on Map". " On Map screen 2. Touch "Traffic Information". "Traffic Information" indicator is highlighted. " On Freeway information screen 99 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 99
, the XMr NavTraffic information arrow will appear on the map screen. The color of the arrow changes depending on the traffic information received. "Orange": Heavy congestion "Yellow": Moderate traffic "Green": Freely flowing traffic 2 100 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 100
MY PLACES My places D Navigation settings Setting up the "Home" ...Setting up the "Preset Destinations" ...Setting up the "Address Book" ...Setting up the "Areas to Avoid" ...Deleting previous destinations ... 4 102 103 105 108 114 119 101 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 101
- Destination search by "Address Book"" on page 66.) Registered book (See page 108.) Sets area to avoid (See page 114.) Deletes previous destinations (See page 119.) Detailed navigation settings (See page 245.) U007ADNS 2 3 4 1. Push the "SETUP" button. 5 6 2. Touch "Navi.". 102 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 102
page 104.) D Deleting home (See page 105.) 5. Enter the location in the same way as for a destination search. (See "Destination search" on page 52.) 103 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 103
"(b) Editing home" on page 104. 4. Touch "Edit". 5. Touch "Edit" for the item you want to change. "Name": To edit home name. The names can be displayed on the map. (See page 112.) "Location on the map. (See page 111.) 6. Touch "OK". 104 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 104
deletion, touch "No". 3. Touch "Preset Destinations". D Registering preset destination (See page 106.) D Editing preset destination (See page 107.) D Deleting preset destination (See page 108.) 105 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 105
"Set". 5. Enter the location in the same way as for a destination search. (See "Destination search" on page 52.) 6. Select a position for this preset destination. 106 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 106
"Navigation Settings" screen. 4. Touch "Edit". 6. Touch "Edit" for the item you want to change. "Name": To edit preset destination names. The names can be displayed on the map. (See 5. Touch the button of the desired preset destination. 107 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 107
Registering address book entries 5. Touch the preset destination for deletion. "Select All": To select all preset destinations on the list. "Unselect All 109.) D Editing address book entries (See page 110.) D Deleting address book entries (See page 114.) 108 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 108
entries can be registered. 5. Enter the location in the same way as for a destination search. (See "Destination search" on page 52.) After the address book entry has been registered, the "Edit Address Book Entry" screen will be displayed. 109 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 109
"Setup" screen. 3. Touch "Address Book" on the "Navigation Settings" screen. 6. Touch "Edit" for the item you want to change. "Name": To edit address book entry names. The names can be 5. Touch the button of the desired address book entry. 110 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 110
. 2. Touch the desired icon. Change pages by touching "Page 1", "Page 2" or "With Sound" tab. Touch either or to adjust the direction. Touch "OK". The bell sounds only when the vehicle approaches this point in the direction that has been set. 111 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 111
". To show the name, touch "On" on the "Edit Address Book Entry" screen. To not show it, touch "Off". 2. Enter the name using the alphanumeric keys. Up to 32 characters can be entered. 3. Touch "OK". The previous screen will be displayed. 112 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 112
MY PLACES D To change "Location" D To change "Phone #" (telephone number) 1. Touch "Edit" of "Location". 1. Touch "Edit" of "Phone #". 2. Touch 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 113 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 113
. 6. Touch "Delete". 7. To delete the address book entry, touch "Yes". To cancel the deletion, touch "No". D Registering areas to avoid (See page 115.) 116.) 119.) D Editing areas to avoid (See page D Deleting areas to avoid (See page 114 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 114
Destination search" on page 52.) 8. Touch either or to change the size of the area to be avoided. 9. Touch "OK". running through the area to avoid, a route passing through the area to be avoided may be shown. D Up to 10 locations can be registered as points/areas to avoid. 115 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 115
off the area to avoid feature. To turn on the feature touch "On" on the "Edit Area to Avoid" screen. To turn off the feature touch "Off" on the "Edit Area to Avoid" screen. 7. Touch "OK". 4. Touch "Edit". 5. Touch the desired area button. 116 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 116
MY PLACES D To change "Name" DISPLAYING NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be the name using alphanumeric keys. Up to 32 characters can be entered. 3. Touch "OK". The previous screen will be displayed. 117 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 117
screen to the debutton to move the cursor sired point on the map. 3. Touch "OK". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 118 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 118
"Yes". To cancel the deletion, touch "No". 4. Touch the button you want to delete. "Select All": To select all previous destinations in the system. "Unselect All": To unselect all previous destinations in the system. 5. Touch "Delete". 119 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 119
MY PLACES 6. To delete the destination, touch "Yes". To cancel the deletion, touch "No". 120 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 120
Telephone and information D Telephone (Hands−free system for cellular phone) Enter a Bluetooth phone ...Call on the Bluetooth phone ...Receive on the Bluetooth phone ...Talk on the Bluetooth phone ...D Calendar 5 122 126 131 138 139 142 121 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 121
driving, do not use a cellular phone or connect the Bluetoothr phone. NOTICE Do not leave your cellular phone in the car. The temperature indoor may be high and damage the phone. Bluetooth is a registered trademark of Bluetooth SIG, Inc. 122 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 122
does not support HFP, you cannot enter the Bluetoothr phone, and take OPP or PBAP service individually. Please go to "http://www.toyota.letstalk.com/" to find approved Bluetoothr phones for this system. U005ADNS " Microphone (Type A) U006ADNS " Microphone (Type B) 123 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 123
outside of the vehicle. When you battery system doesn't have a charging function. 3 Indicates the receiving area. "Rm" is displayed when receiving in Roaming area. "Hm" is displayed when receiving in Home area. The receiving area may not be displayed depending on the phone you have. 124 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 124
will never come back again. Pay much attention when initializing the data. You can initialize the following data in the system. D Phonebook data D Call history data D Speed dial data D Voice tag data D Bluetoothr phone data D Volume setting D Details setting 125 2010 SEQUOIA Navigation from April - 2010 Toyota Sequoia | Navigation Manual - Page 125
and person's body (excluding extremities: hands, wrists, feet and legs). Co−location: This transmitter must not be co−located or operated in conjunction with any other antenna or transmitter. U009ADNS 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 126 2010 SEQUOIA Navigation from April - 2010 Toyota Sequoia | Navigation Manual - Page 126
on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen to try again. 127 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 127
for. Next, the system automatically connects with the latest of the phones connected to in the past. Then, the connection result is displayed. This screen appears when the Bluetoothr phone is first connected after the engine switch is in the "ACC" or "ON" position. 128 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 128
connection has failed or "Handsfree power" is turned off, you have to connect Bluetoothr manually. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Connect Phone". 4. Touch "Handsfree Power", or select the phone to connect. 129 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 129
. 6. When the connection is completed, this screen is displayed. Now you can use the Bluetoothr phone. ∗: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 130 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 130
−free system. You can call using the 6 methods described below. D By dial You can call by inputting the phone number. This cannot be operated while driving. 1. Push the "INFO/PHONE" button. You can also push of the steering wheel to display the "Phone" screen. 2. Touch "Phone". 131 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 131
You can call by phonebook data which is transferred from your cellular phone. The system has one phonebook for each telephone. You can register up to 1000 numbers in steering 1. Touch "Contacts". 2. Select the desired data from the list. 132 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 132
is empty 3. Select the desired number from the list. Touch wheel. or push of the steering 1. Touch "Contacts". 2. Touch "Yes" if you want to transfer new contacts from a cellular phone. Touch "No" if you want to edit the phonebook. 133 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 133
". 2. Touch the desired number to call. You can change the page by touching "Speed Dial 2" or "Speed Dial 3" tab. 2. Select the desired data from the list. When the list is switched, touch "All", "Missed", "Incoming" or "Outgoing" tab. 134 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 134
in the phonebook is received, the name and the number are displayed. D Unnoticed phone number such as a public phone is not memorized in the system. D A international phone call may not be made depending on the cellular phone which you have. 135 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 135
. (For the operation and command of voice recognition, see "Speech command system" on page 44.) This can be operated while driving. The "Dial by Name" operating procedure is explained here. Other operating procedures are also similar. 136 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 136
list." "(beep)" You: "MIKE." System: "MIKE." "Say the type of number." "Such as "Mobile", "Home", "Work" or "Other"." "(beep)" You: "Home." System: "MIKE." "Home." "Push the off−hook switch to dial or say "Dial"." "(beep)" You: "Dial." System: "Dial." Now, you can call MIKE. 137 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 137
phone D By POI∗ call You can call by touching when it is displayed on the screen from navigation system. (See "POI INFORMATION" on page 36 for details.) ∗: Point of Interest When a call is received, on the cellular phone which you have. 138 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 138
cannot change from Hands−free call to cellular phone call while driving. When you change from manual that comes with your cellular phone. Touch the desired number to input the key. To hang up the phone: Touch or push of the steering wheel. This cannot be operated while driving. 139 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 139
can do this operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number in the of voice recognition, see "Speech command system" on page 44.) 140 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 140
accepted for HFP Ver. 1.5, this function can not be used. INFORMATION Interrupt call operation may differ depending on your phone company and cellular phone. 141 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 141
Push the "INFO/PHONE" button. 2. Touch "Calendar". On this screen, the current date is highlighted in yellow. or or : To change month. : To change year. "Today": To display the current month calendar (if another month will be displayed). 142 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 142
...CD changer operation ...Bluetooth audio operation ...DVD player operation ...USB memory player/iPod player operation ...D Audio/video remote controls D Audio/video system operating hints 6 144 145 145 153 164 176 184 210 217 219 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 143 - 2010 Toyota Sequoia | Navigation Manual - Page 143
148. Function menu tab To control the radio, CD changer, DVD player∗, Bluetoothr audio player, AUX or USB memory player/iPodr, touch the touch−screen tabs. For details, see page 147 and 153. ∗: Vehicles with rear seat entertainment system 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 144 - 2010 Toyota Sequoia | Navigation Manual - Page 144
with applicable FCC radio frequency exposure regulations, must be used with a distance of at least 7.9 in. (20 cm) between the antenna and the body of any person at all time during use. ∗: Vehicles with rear seat entertainment system 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 145 - 2010 Toyota Sequoia | Navigation Manual - Page 145
longer than necessary when the engine is not running. U026ADNS " Type B By pushing the switch above, you can operate the speech command system. For the operation of the speech command system and the list of commands, see pages 44 and 47. 146 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 146
"SAT" or "DISC/AUX" button to turn on the desired mode. U6080GS Push the "AUDIO" button and touch the "AM", "FM", "SAT", "CD", "DVD∗", "BT", "AUX"or "USB" tab to turn on the desired mode. ∗: Vehicles with rear seat entertainment system 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 147 - 2010 Toyota Sequoia | Navigation Manual - Page 147
off, then the entire audio system will be turned off when you eject all the discs. If the other function was previously playing, it will come on again. U6081GS U6080GS U6082GS U6083GS ∗: Vehicles with rear seat entertainment system 148 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 148
. D You cannot operate dimmed touch−screen buttons. D Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the touch screen. U6078GS ∗: Vehicles with rear seat entertainment system 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 149 - 2010 Toyota Sequoia | Navigation Manual - Page 149
and of the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/ select "On". The system adjusts to the optimum volume and tone quality according to the speed of car. 150 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 150
AUDIO/VIDEO SYSTEM (f) Selecting screen size (with rear seat entertainment system) 1. Push the "AUDIO" button and touch "DVD" tab. U6007GS 1. Touch "Sound" tab to display this screen. 2. Touch the desired button. "Treble" "+" or "-": Adjust high−pitched tones. "Mid" "+" or "-": Adjust mid−pitched - 2010 Toyota Sequoia | Navigation Manual - Page 151
AUDIO/VIDEO SYSTEM U6009GS 4. Touch the desired button. "Normal": Displays a 3 : 4 screen, with either side in black. "Wide 1": Widens the 3 : 4 disassemble or oil any part of the changer. Do not insert anything other than a disc into the slot. 152 2010 SEQUOIA Navigation from April.09 Prod.( - 2010 Toyota Sequoia | Navigation Manual - Page 152
AUDIO/VIDEO SYSTEM - Radio operation (h) Your DVD player (with rear seat entertainment system) The sound of the rear seat entertainment system can be enjoyed by pushing the "DISC/AUX" button or touching the "DVD" tab on AUDIO screen. (i) AUX adapter The sound of portable audio players connected to - 2010 Toyota Sequoia | Navigation Manual - Page 153
AUDIO/VIDEO SYSTEM U014ADNS or FM2) can store up to 6 stations. To change the preset station to a different one, follow the same procedure cancelled when the power source is interrupted by battery disconnection or a blown fuse. Turn the knob 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 154
station, touch "SCAN" again. (d) Radio Data System Your audio system is equipped with Radio Data Systems (RDS). RDS mode provides you to receive text signal station. RDS features are available for use only on FM stations which broadcast RDS information. 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 155
AUDIO/VIDEO SYSTEM U6080GS "Type A "" Each time you touch "A Type " or "Type "", the program type changes as in the following: D ROCK D MISC system starts to seek the station in the relevant program type. If any type program station is not found, "Nothing" appears on the display. 156 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 156
system receives a radio text from RDS station, "MSG" appears on the display. Touch "Message", and a text message is displayed on the screen. This function is available only when the vehicle a while until a traffic announcement is received. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 157 - 2010 Toyota Sequoia | Navigation Manual - Page 157
. The channel(000) alternates the display between the radio ID and the specific radio ID code. INFORMATION Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XMr Satellite Radio. 158 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 158
AUDIO/VIDEO SYSTEM (c) Listening to satellite radio (d) Channel category U015ADNS U6082GS Touch either "A Type" or "Type "" to go to channel. If you turn continuously, you can rapidly scroll forward or down through the channels. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 159 - 2010 Toyota Sequoia | Navigation Manual - Page 159
AUDIO/VIDEO SYSTEM (e) −screen button can store three SAT channels. To change the preset channel to a different one, follow the same is cancelled when the power source is interrupted by battery disconnection or a blown fuse. (f) Selecting a channel 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 160
When you touch "Text", the song/program title and the artist name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "Text" again, the display returns. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 161 - 2010 Toyota Sequoia | Navigation Manual - Page 161
radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or NO SIGNAL LOADING OFF AIR −−− Contact the XMr Listener 1−877−438−9677 (Canada). 162 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 162
. INFORMATION This XMr tuner supports "Audio Services" (Music and Talk) of only XMr Satellite Radio and "Text Information"∗ linked to the respective "Audio Services". ∗:Text Information includes, Station Name, (Artist) Name, (Song) Title and Category Name. 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 163
change to green, you can insert the next disc. 4. Push the "LOAD/CLOSE" button to close the display. The changer will automatically start playing from the last disc you inserted. If the label faces down, the disc cannot be played. In this case, "Check CD" appears on the screen. 164 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 164
side of the slot start blinking. After the disc is ejected, the amber indicators change to green. A disc can be inserted. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 165 - 2010 Toyota Sequoia | Navigation Manual - Page 165
take out the disc. Keep pushing the "LOAD/CLOSE" button for approximately 5 seconds and release it. At this time, the audio disc and the map DVD−ROM will be ejected. 166 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 166
DVD player is turned on, push the "DISC/AUX" button again or touch "CD" tab to switch to the CD changer. If the rear seat entertainment system is on, pushing the "DISC/AUX" button switches the sound of the front audio system and that of the rear seat entertainment system. 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 167
AUDIO/VIDEO SYSTEM (e) Playing an audio disc U6093GS Push the "AUDIO" button and touch the "CD" tab, then touch the "Change Discs". Choose an audio a list. This function is available only when the vehicle is not moving. Touch "Select". The track list is displayed. 168 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 168
the program of your choice, touch "SCAN" on the screen a second time. After all the audio discs are scanned in one pass, normal play resumes. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 169 - 2010 Toyota Sequoia | Navigation Manual - Page 169
will automatically go back to the beginning system selects a track on all the audio discs in the changer in random order. To cancel it, touch "RAND" once again. If a CD−TEXT disc is inserted, the title of the disc and track will be displayed. Up to 29 letters can be displayed. 170 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 170
to go to the previous folder. "Select" for Folder: The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. U6026GS Touch the desired folder number. The changer will start playing the first file of - 2010 Toyota Sequoia | Navigation Manual - Page 171
AUDIO/VIDEO SYSTEM U019ADNS U014ADNS SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of " is on, all the files in the folder you are currently listening to can be stepped up or down. 172 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 172
AUDIO/VIDEO SYSTEM U6095GS "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. U6027GS Touch the desired file number. The changer will start playing the selected file from the - 2010 Toyota Sequoia | Navigation Manual - Page 173
AUDIO/VIDEO SYSTEM U6096GS SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen briefly while the disc is playing. "SCAN" appears on "SCAN" on the screen a second time. After all the folders are scanned in one pass, normal play resumes. 174 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 174
. When the folder is finished, the changer will automatically go back to the beginning of the folder and play the folder again. system selects a file in all the folders. To cancel it, touch "RAND" once again. When a file is skipped or the system is inoperative, touch "RAND" to reset. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 175
from the vehicle speaker via wireless communication. U6086GS This audio system supports Bluetoothr, a wireless data system capable of playing portable audio music without cables. If your portable player does not support Bluetoothr, the Bluetoothr audio system will not function. 176 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 176
In the following conditions, the system may not function. D The portable player is turned off. D The portable player is not connected. D The portable player has a low battery. D It may take time, the phone connection is carried out during Bluetoothr audio play. 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 177
battery charge left. An antenna system may not function when you use the Bluetoothr portable player in the following conditions. D Your portable player is hiding behind from the display (behind the seat player. This system doesn't have a charging function. 178 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 178
for the connection, it will be automatically connected whenever the engine switch is in either "ACC" or "ON" position. D When the auto connection is off Manually connect the portable player in accordance with the following procedure. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 179 - 2010 Toyota Sequoia | Navigation Manual - Page 179
can use the portable player. U6035GS Connect the portable audio player to the Bluetoothr audio system. U6034GS This screen will appear when the connection has failed. U6036GS This screen will appear when the connection has been successfully established. 180 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 180
the engine switch is in the "ACC" or "ON" position, the system automatically reconnects the portable player. In player that is connected to the system, the music may start playing when touching while it is paused. On the other hand, the music may while it is playpause when touching ing. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 181
"Ɲ" side of the "SEEK/ TRACK" button to reverse the player. When you release the button, the player will resume playing. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. 182 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 182
. When the track is finished, the player will automatically play it again. To cancel the repeat, touch "RPT" once again. INFORMATION Depending on the portable player that is connected to the system, certain functions may not be available. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 183 - 2010 Toyota Sequoia | Navigation Manual - Page 183
disc only when a disc is loaded in the DVD player. A WMA and DVD audio disc cannot be played. For details of "Rear seat entertainment system", refer to "Owner's Manual". For appropriate discs for this player, see "Audio/video system operating hints" on page 219. (a) Inserting the disc INFORMATION - 2010 Toyota Sequoia | Navigation Manual - Page 184
, "Check disc" will also appear on the screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 219. Push the " " button. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 185
to display audio screen and touch the "DVD" tab if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD changer is turned on, push the "DISC/ AUX" button again or touch "DVD" tab to switch to the DVD player.) 186 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 186
. As you release the button, the player will start playing the selected track from the beginning. "Select" for track: The desired track can be selected from a list. This function is available only when the vehicle is not moving. Touch "Select". The track list is displayed. : By touching this touch - 2010 Toyota Sequoia | Navigation Manual - Page 187
finished, the player will automatically go back to the system selects a track in the disc you are currently listening to. To cancel it, touch "RAND" once again. If a CD−TEXT disc is inserted, the title of the disc and track will be displayed. Up to 29 letters can be displayed. 188 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 188
touch and hold this touch−screen button until the beep sounds. "Select" for Folder: The desired folder can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The folder list is displayed. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 189 - 2010 Toyota Sequoia | Navigation Manual - Page 189
disc. When you release the button, the player will resume playing. "Select" for File: The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file list is displayed. 190 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 190
10 seconds, then scan again. To select a file, touch "SCAN" on the screen a second time. If the player reaches the end of the folder, it will continue scanning from file 1. After all the files are scanned in one pass, normal play resumes. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 191 - 2010 Toyota Sequoia | Navigation Manual - Page 191
the beep sounds while the folder is playing. "FLD.RPT" appears on the screen. When the folder is finished, the player will automatically go back to the beginning of the folder and play the folder again. To cancel it, touch "RPT" once again. 192 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 192
a disc as the software producer intended. So some functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For the detailed information about DVD video discs, see "(i) DVD player and DVD video disc information" on page 208. Precautions on - 2010 Toyota Sequoia | Navigation Manual - Page 193
a significant impact on the human body or pose a driving hazard. Keep this in mind when you adjust the volume. U6077GS This screen appears when the video screen is first displayed after the engine switch is in the "ACC" or "ON" position. 194 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 194
screen. The screen mode can be changed. If you touch "Full Screen" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. U6051GS DVD SETTINGS If you touch "Settings" on "DVD" screen, "Settings" screen appears. 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 195
screen appears. (See page 151.) U6084GS DISPLAYING DVD CONTROLS If you touch , while watching video, DVD controls will appear. If " " appears on the screen when you touch a control, the operation relevant to the control is not permitted. 196 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 196
the DVD video disc provided separately.) Each time you touch "Move Buttons", the controls on the screen move upward and downward. When you touch the screen, the controls will disappear. To display them again, touch the screen. When you touch screen returns. , the previous 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 197
returns. , the previous CHANGING THE SUBTITLE LANGUAGE Each time you touch "Change", the language is selected from the ones stored in the discs and changed. When you touch "Hide", the subtitle can be hidden. When you touch screen returns. , the previous 198 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 198
for discs that are multi−angle compatible when the angle mark appears on the screen. Each time you touch "Change", the angle is selected from the ones stored in the discs and changed. When you touch screen returns. , and the previous 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 199 - 2010 Toyota Sequoia | Navigation Manual - Page 199
read on the "DVD Language" screen. If you cannot find the language you want to read on this screen, touch "Other" and enter a language code. For the entry of language code, see the following "ENTER AUDIO LANGUAGE CODE". To return to the "Setup Menu" screen, . touch 200 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 200
SYSTEM D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock". 2. Enter the 4−digit personal Language" screen, "Select Subtitle Language" screen or "DVD Language" screen, you can select the language you want 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 201 - 2010 Toyota Sequoia | Navigation Manual - Page 201
AUDIO/VIDEO SYSTEM 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 0209 0214 0215 0218 0301 0315 Cambodian Kannada Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian Malagasy Maori Macedonian Malayalam Mongolian 202 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 202
AUDIO/VIDEO SYSTEM 1315 1318 1319 1320 1325 1401 1405 1415 1503 1513 1518 1601 1612 1619 1721 1813 1814 1815 Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapük Wolof Xhosa Yoruba Zulu 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 203 - 2010 Toyota Sequoia | Navigation Manual - Page 203
button and touch the "DVD" tab to display this screen. When you touch "Wide" on "Settings" screen, the screen mode can be changed. If you touch "Full Screen" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. 204 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 204
": A multiplex transmission changing control. The mode changes from Main/Sub to Main, to Sub and back to Main/Sub by touching this control. "Return": Touching this will display the predetermined scene and start playing from there. "Wide": The screen mode screen appears. 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 205
AUDIO/VIDEO SYSTEM DISPLAYING VIDEO CD CONTROLS If you touch the part where controls are not located while you are watching video on the video CD, video this to fast forward during the playback and start playing frame by frame during pause. 206 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 206
disc from the player and allow the player to cool down. If the malfunction is not rectified: Take your vehicle to your dealer. If an MP3 disc contains CD−DA files, only CD−DA files are played. If an MP3 disc contains files other than CD−DA, only MP3 files are played. 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 207
SYSTEM (i) DVD player and DVD video disc information DVD VIDEO DISCS This DVD player conforms to NTSC color TV formats. The DVD video disc conforming to another formats such as PAL or SECAM cannot be used. Region codes: Some DVD region code 208 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 208
" and the double−D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. E1992−1997 Dolby Laboratories. All rights reserved. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 209 - 2010 Toyota Sequoia | Navigation Manual - Page 209
player or iPodr player while driving. U6078GS " USB memory player NOTICE D Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player iPodr player using an ipodr cable. 210 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 210
folder. If the same device is removed and reinserted (and the contents have not been changed), the USB device will resume play from the same point in which it was last used. only) U6079GS 1. Touch "Menu". 2. Select the desired play mode. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 211 - 2010 Toyota Sequoia | Navigation Manual - Page 211
number. The player will start playing the first file of the selected folder. : By touching this touch−screen button, the list moves up by 5 folder groups. If this touch−screen button is touched when the top page of the list is displayed, the last page is displayed. 212 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 212
you release the button, the player will resume playing. "TUNE/FILE" knob: Use for direct access to a desired file or track in the player. Turn the "TUNE/FILE" knob to step up or down all the files or tracks in the player you are currently listening to. 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 213
this touch−screen but- U6079GS " iPodr player "Select" for File or Track: The desired file or track can be selected in a list. This function is available only when the vehicle is not moving. Touch "Select". The file or track list is displayed. ton, the list moves up by 5 file or track groups - 2010 Toyota Sequoia | Navigation Manual - Page 214
SYSTEM D Searching for a desired file (USB memory player only) D Searching for a desired folder (USB memory player only) U6111GS Touch "SCAN" on the screen briefly while the music is playing. "SCAN" appears on the screen. The player . 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 215 - 2010 Toyota Sequoia | Navigation Manual - Page 215
or track is finished, the player will automatically play it again. the changer will automatically go back to the beginning of the system selects a file in all files. To cancel it, touch "RAND" once again. When a file is skipped or the system is inoperative, select "RAND" to reset. 216 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 216
you hear a beep to change to the next or the previous disc. Repeat this operation until you reach the disc you want to listen to. U020ADNS Some parts of the audio system can be adjusted using decrease while the switch is being pressed. 1 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 217 - 2010 Toyota Sequoia | Navigation Manual - Page 217
AUDIO/VIDEO SYSTEM Vehicles with rear seat entertainment system - DVD player While the DVD player is in operation, the chapter or track can be changed by pushing the "Ɯ" or "Ɲ" switch. Bluetoothr audio player Use this switch to skip up or down to a different track or album in either direction. To - 2010 Toyota Sequoia | Navigation Manual - Page 218
. The farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your radio: 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 219 - 2010 Toyota Sequoia | Navigation Manual - Page 219
high temperatures can keep your CD changer and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before you use the changer and player. D Bumpy roads or other vibrations may make your CD changer and DVD player skip. D If moisture gets into your CD changer - 2010 Toyota Sequoia | Navigation Manual - Page 220
on your changer. Copy−protected CD CD−ROM Video CDs DVD player D Use only discs marked as shown above. The following products may not be playable on your player. SACD Copy−protected CD CD−ROM DVD−R DVD+R DVD−RW DVD+RW DVD−ROM DVD−RAM 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 221 - 2010 Toyota Sequoia | Navigation Manual - Page 221
use of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of audio disc and the map DVD−ROM will be ejected. 6U5B95X " Transparent/translucent discs 6U5B94X " Low quality discs 222 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 222
AUDIO/VIDEO SYSTEM 6U5B97X 6U5B98X " Correct " Wrong track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away or anti−static device. 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 223 - 2010 Toyota Sequoia | Navigation Manual - Page 223
file system. When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). The MP3/WMA player plays back files player. D MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio player. D The player is compatible with VBR (Variable Bit Rate). 224 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 224
mp3 6U5161aX Folder 3 006.mp3 MP3 player (rear seat entertainment system) Folder 1 003.mp3 Folder 2 004.mp3 005.mp3 001.mp3 002.wma 6U5161aX Folder 3 006.mp3 MP3/WMA player (front audio system) Folder 1 003.mp3 Folder 2 004.mp3 005.wma 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) 225 - 2010 Toyota Sequoia | Navigation Manual - Page 225
(rear seat entertainment system)-It is possible to play up to 253 folders on one disc. D MP3/WMA player (front audio system)-It is possible to play up to 192 folders or 255 files on one disc. D USB memory player- It is possible to play up to 999 folders or 255 files per folder. D The order changes - 2010 Toyota Sequoia | Navigation Manual - Page 226
SYSTEM viewed when the track is played back. WMA Tag- WMA files can working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size size smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8, and 9. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 227
AUDIO/VIDEO SYSTEM 228 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 228
REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM Rear view monitor system D Rear view monitor system 7 230 229 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 229
display another screen. The rear view monitor system is a supplement device intended to assist back up. When backing up, be sure to check behind and all around the vehicle visually. D If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the - 2010 Toyota Sequoia | Navigation Manual - Page 230
the screen may change. Image is displayed approximately level on screen. U025ADNS On screen " Corners of bumper The area covered by the camera is limited. The camera does not detect objects which are close to either corner of the bumper or under the bumper. 231 2010 SEQUOIA Navigation from April - 2010 Toyota Sequoia | Navigation Manual - Page 231
vehicle orientation or road conditions. The rear view monitor system camera is located on the back door as shown in the illustration. The camera camera D When the camera has scratches or dirt on it D When the sun or the beam of headlights is shining directly into the camera lens 232 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 232
effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera; when transmitted by the camera, the light source appears to have a vertical streak above and below it. 233 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 233
REAR VIEW MONITOR SYSTEM 234 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 234
of operation sounds and automatic screen change.) D Clock settings (Used for changing time zones and the on/off available for portable audio devices and Bluetooth audio devices players.) D Vehicle settings (Vehicle information can be set.) 8 236 241 243 245 245 254 293 300 235 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 235
following functions can be performed. No. 1 Function You can change the language. (See "D Selecting a language" on page 237.) Rear system lock∗ can be set to "On" or "Off". (See "D Rear system lock" on page 238.) ∗: Vehicles with rear seat entertainment system "On" or "Off" can be selected to sound - 2010 Toyota Sequoia | Navigation Manual - Page 236
page 240.) D Selecting a language You can change the language. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. 6 7 8 3. Touch "Language". 4. Touch the desired button. The previous screen will be displayed. 5. Touch "Save". 237 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 237
passengers cannot operate the rear seat entertainment system. Only front passengers can operate the system. "Off": Both the front and rear passengers can operate the rear seat entertainment system. The line color will be changed. 5. Touch "Save". 238 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 238
SETUP D Selecting a keyboard layout Keyboard layout can be changed. 1. Push the "SETUP" button. 2. Touch "General" on the "Setup" screen. Then touch Touch "ABC" or "QWERTY" of "Keyboard Layout" to choose the keyboard layout. 5. Touch "Save". 239 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 239
be changed. 1. vehicle is not moving. "General Settings" screen. 3. Touch "Unit of Measurement". 4. Select "Kilometer" or "Mile". 5. Touch "Save". INFORMATION This function is available only in English or Spanish. To switch language, see "D Selecting a language" on page 237. 240 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 240
Used for changing time zones and the on/ off settings of daylight saving time. "General Settings" screen. U007ADNS 1. Push the "SETUP" button. 3. Touch "Delete Personal Data". 2. Touch "Clock". 4. Touch "Delete". 5. Touch "Yes". 3. Touch the items to be set. 4. Touch "Save". 241 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 241
. 1 2 Function Time zone can be changed. (See "D Time zone" on page 242.) "On" or "Off" can be selected for daylight savings time. 3. Touch "Time Zone". 4. Touch the desired time zone. If you touch "Other", adjust the zone manually. 5. Touch "OK". 242 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 242
selected, the speech command system can be operated without pressing the talk switch more than once. When using the traffic information function, voice guidance can be set to "On" or "Off". 2 3 4 3. Touch the items to be set. 4. Touch "Save". 5 6 243 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 243
guidance while being guided to your available only in English. To select English, see "D Selecting a language" on page 237. D When the "Traffic Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show Free Flowing Traffic" will not operate. 244 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 244
page 105.) Sets address book (See page 108.) Sets area to avoid (See page 114.) Deletes previous destinations (See page 119.) Detailed navigation settings (See page 245.) 1. Push the "SETUP" button. 2. Touch "Navi.". 3. Touch "Detailed Navi. Settings". 245 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 245
massages when the route includes traffic restrictions or seasonally restricted roads. When "On" is selected, freely flowing traffic can be shown with the arrow. 2 3 4 5 246 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 246
8 9 4. Touch "Driving Speeds". 5. Touch or to set the average vehicle speeds for "Residential", "Main Streets", and "Freeways". To set the default speeds, touch "Default". 6. After setting of the desired speeds is completed, touch "Save". 247 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 247
such as traffic jams and construction work. D It is possible to display up to 99 hours 59 minutes. D Auto avoid traffic The guidance route automatically changes to another route to avoid heavy you do not wish to reroute, touch "No". 248 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 248
". 5. Touch "Save". INFORMATION When the "Traffic Information" indicator is dimmed, "Auto Avoid Traffic", "Traffic Voice Guidance" and "Show Free Flowing Traffic" will not operate. 249 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 249
is not on the screen, touch "List All Categories" to list all POI categories. "Detailed Navi. Settings" screen. 4. Touch "Customize POI Icons". 7. Touch the desired category. 8. Touch "OK". 5. Touch the category button to be changed. 250 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 250
2 of the D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire accuracy of a current vehicle position, see "Limitations of the navigation system" on page 308. 251 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 251
the direction of the current vehicle position mark. 5. Touch "OK". The map will be displayed. 1. Touch "Position / Direction". 2. Touch the 8 directional touch to screen button to move the cursor the desired point on the map. 3. Touch "OK". 252 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 252
procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map will be displayed. 4. Touch "Pop−up Information". 5. Touch "On" or "Off". 6. Touch "Save". 253 2010 SEQUOIA Navigation from April - 2010 Toyota Sequoia | Navigation Manual - Page 253
appears when the system is in the POI mode and the map scale is over 0.5 miles (1 km). 1. Push the "SETUP" button. The message appears when the map is switched to the twin map screen mode. 2. Touch "Phone". Please refer to the following pages for each setting. 254 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 254
D Ring volume setting 1. Touch "Ring Volume". 2. Change each setting according to the following procedures. 3. When system will automatically increase the volume by one step up when the speed exceeds 50 mph (80 km/h). 2. Touch "-" or "+" to adjust the ring volume. 3. Touch "OK". 255 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 255
the "Connect Phone" screen. 1. Push the "SETUP" button. 2. Touch "Phone". 2. Touch "Yes". 3. Touch "Manage Phone". Please refer to the following pages for each setting. 256 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 256
"(add new)" to register your cellular phone to the system. 3. When the connection is completed, this screen is manual that comes with your cellular phone. If you want to cancel it, touch "Cancel". When this screen is displayed, follow the guidance on the screen to try again. 257 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 257
will reconnect automatically when you finish registration. It will not be reconnected depending on the phone you are using. 4. Touch "Options". 5. Touch "New Phone". 258 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 258
Touch "(empty)" to register your cellular phone to the system. The following operations are the same as the operation the system, only one Bluetoothr phone can function at a time. 1. Select the phone to connect. The Bluetoothr mark is displayed when you connect the phone. 259 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 259
can use the Bluetoothr phone. When another Bluetoothr device is currently connected, this screen is displayed. If you want to disconnect it, touch "Yes". 260 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 260
" ...The address peculiar to the system. You cannot change it. If you have registered two Bluetoothr phones with the same device name and you cannot distinguish one from the other, refer to it. 1. Touch "Options". 2. Touch "Edit Phones". 261 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U - 2010 Toyota Sequoia | Navigation Manual - Page 261
SETUP 3. Select the phone to edit. 5. Use the software keyboard to input the device name. 4. This screen is displayed. If you want to change the device name, touch "Edit". 6. Confirm the device name and touch "OK". 262 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 262
the same time. 2. Touch "Remove Phones". 4. Touch "Yes". INFORMATION When you delete a Bluetoothr phone, the phonebook data will be deleted at the same time. 263 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 263
of voice recognition, see "Speech command system" on page 44.) When you select the command of "Add New Phone", you must carry out the following operation on the screen. 3. Touch "Phonebook". Please do each setting from this screen. 264 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 264
"INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Touch "Manage Contacts". 4. Touch "Options". Please refer to the following pages for each setting. 5. Touch "Manage Contacts". 265 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 265
not support OPP service, you can not use this function. You can transfer the phonebook data only by operating your phone. 1. Touch "Transfer Contacts". 2. Touch "Replace Contacts" or "Add Contacts". In case that the phonebook contains phonebook data, this screen is displayed. 266 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 266
data transfer finishes. (It will not be reconnected depending the phone you are using.) When this screen is displayed, try the transfer operation again. 267 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 267
after the phone number, input the tone signal too. 2. Use the software keyboard to input the name and touch "OK". 4. Select the phone type. 268 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 268
screen is displayed. When you want to add a number to this contact, touch "Yes". 1. Touch "Edit Contacts". 2. Select the data you want to edit. 269 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 269
desired data from the list. 3. Touch "Edit" for the desired name or number. 4. Edit the name or the number. (See "D Registering the phonebook data" on page 268.) 5. When you complete the edit, touch "Save". 5. Touch "Options". 6. Touch "Edit Contact". 270 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 270
from the list. D Deleting the phonebook data You can delete the data. When you release your car, delete all your data on the system. 1. list. 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 271 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 271
SETUP You can also delete it in the following way. 1. Push the "INFO/PHONE" button. 2. Touch "Phone". 3. Touch "Contacts". 4. Select the desired data from the list. 3. Touch "Yes". 5. Touch "Options". 6. Touch "Delete Contact". 272 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 272
phone, the phonebook data will be deleted at the same time. 4. Touch "Manage Speed Dials". Please refer to the following pages for each setting. 273 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 273
from phonebook. Up to 18 numbers per phone can be registered. 1. Touch "New Speed Dial". 4. Touch "Options". 2. Select the data you want to register. 274 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 274
you want to replace it. 4. Touch the touch−screen button you want to register in. 6. When this screen is displayed, the operation is complete. 275 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 275
"Speed Dials". 6. Select the data you want to register. 4. Touch "(add new)". 7. Touch the desired phone number. 5. Touch "Yes" to set new speed dial. 276 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 276
3. Touch "Contacts". 4. Select the desired data from the list. 7. This screen is displayed. The following operations are the same as the operation when you operate it from the "SETUP" button. 5. Touch "Options". 6. Touch "Set Speed Dial". 277 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 277
SETUP D Editing the speed dial You can edit the speed dial. 4. Use the software keyboard to input the name. 1. Touch "Edit Speed Dials". 5. Touch "Save". 2. Touch the touch−screen button you want to edit. 3. Touch "Edit". 278 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 278
Dials". 2. Select the desired data or touch "Select All", then touch "Delete". You can select multiple data and delete them at the same time. 279 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 279
All", then touch "Delete". You can select multiple data and delete them at the same time. 2. Select the desired history to delete. 4. Touch "Yes". 280 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 280
when you operate it from the "SETUP" button. You can similarly operate other call history. Please refer to the following pages for each setting. 281 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 281
a voice tag for up to 20 numbers. 1. Touch "New Voice Tag". 4. Touch "Options". 2. Select the data you want to register. 5. Touch "Manage Voice Tags". 282 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 282
". 4. Select the desired data from the list. 3. Touch "D REC", and record a change the language setting from the language setting used when registering. If they are different, the voice recognition can't recognize the voice tag that you have registered. 6. Touch "Set Voice Tag". 283 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 283
data you want to edit. 3. This screen is displayed. The following operations are the same as the operation when you register the voice tag. 284 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 284
SETUP - Bluetoothr D Deleting the voice tag You can confirm and change the Bluetoothr settings. 1. Push the "SETUP" button. 2. Touch "Phone". 1. Touch "Delete Voice Tags". 3. the same time. 4. This screen is displayed. 3. Touch "Yes". 285 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 285
is disconnected, and the system will not connect to it next time. You can select the state of "Handsfree Power". On: The auto connection is turned on. Off: The auto connection is turned off. You can not change the state from "On" into "Off" while driving. 286 2010 SEQUOIA Navigation from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 286
of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. When you connect the phone while Bluetoothr audio is playing 2. Touch "On" or "Off". This screen is displayed, and the Bluetoothr audio will stop temporarily. 287 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 287
and touch "OK". INFORMATION The device names are common Bluetoothr audio and Bluetoothr phone. If you change the device name of the phone, the device name of the audio will change at same time. However, passcodes can be set separately. 288 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 288
is playing while 1. Touch "Default". This screen is displayed, and the Bluetoothr audio will stop temporarily. 2. Touch "Yes". If the state of "Handsfree Power" is changed from "Off" into "On", Bluetoothr connection will begin. 289 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 289
call display. 3. Touch "Details". 4. Do each setting according to the following procedures. 5. When you complete each setting, touch "Save". 1. Touch Mode". "Incoming Call Display 290 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 290
the engine switch is in the "ACC" or "ON" position and the Bluetoothr is automatically connected, the connection check is displayed. When "Display Phone Status" is "On", this status is displayed. When "Display Phone Status" is "Off", this status is not displayed. 291 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 291
SETUP D Initializing the settings You can initialize the settings. 1. Touch "Display Phone Status". 1. Touch "Default". 2. Touch "On" or "Off". 2. Touch "Yes". 292 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 292
SETUP" button. U10003GS U10025GS 2. Touch "Audio" on "Setup" screen. 4. Select desired portable player and then touch "OK". Although you can register up to two portable players in the system, only one portable player can function at a time. 293 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 293
the system. You cannot change it. If you have registered two Bluetoothr portable players with the same device name and you cannot distinguish one from the other, refer to it. "Connection Method" ...The connection method can be switched between "From Vehicle" and "From Portable Player". D Changing - 2010 Toyota Sequoia | Navigation Manual - Page 294
From Vehicle: Connect the audio system to the portable player. From Portable Player: Connect the portable player to the audio system. The Portable Player", "Auto Bluetooth∗ Connect" cannot be selected. ∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc. 295 2010 SEQUOIA Navigation from - 2010 Toyota Sequoia | Navigation Manual - Page 295
displayed on the screen into the portable player. For the operation of the portable player, see the manual that comes with it. If you want player in case of using the same one. U10012GS When this screen is displayed, follow the guidance on the screen to try connection again. 296 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 296
". The system will disconnect the portable player and remove it. U10014GS 2. Select the portable player you want to delete and touch "OK". U10015GS 3. Touch "Yes" to unregister the selected portable player. ∗: Bluetooth is a registered trademark of Bluetooth SIG.Inc. 297 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 297
ON" position, the selected portable player will be automatically connected and the connection result is displayed. MANUALLY When the auto connection failed or turned off, you have to connect Bluetoothr manually. For the manual operation, see page 179. 298 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 298
name and touch "OK". INFORMATION The device names are common Bluetoothr audio and Bluetoothr phone. If you change the device name of the audio, the device name of the phone will change at same time. However, passcodes can be set separately. 299 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 299
when it is time to replace a part or certain components. (See page 27.) U10023GS U007ADNS 1. Touch "Default" on "BT Audio Settings" screen. 1. Push the "SETUP" button. U10024GS 2. Touch "Yes". 2. Touch "Vehicle". 3. Touch "Maintenance". 300 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 300
this button is touched, the indicator is illuminated. The system is set to give maintenance information with the "Information" screen. (See page 27.) When the vehicle needs to be serviced, the touch screen button color will change to orange. 301 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 301
Replace tires "Battery": Replace battery "Brake pad": Replace brake linings "Wipers": Replace wiper blades "Coolant": Replace engine coolant "Brake oil": Replace brake fluid "Trans. fluid": Replace transmission fluid "Service": Scheduled maintenance "Air filter": Replace air filter "Personal": New - 2010 Toyota Sequoia | Navigation Manual - Page 302
register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the "SETUP" button. 2. Touch "Vehicle" on the "Setup" screen. 3. Touch "Maintenance" on the "Vehicle Settings" screen. 6. Touch "Edit" for the item you want to change. "Dealer": To - 2010 Toyota Sequoia | Navigation Manual - Page 303
" or "Contact" D To edit "Location" 1. Touch "Edit" of "Dealer" or "Contact". 1. Touch "Edit" of "Location". 2. Enter the name using the alphanumeric keys. Up to point on the map. 3. Touch "OK". The previous screen will be displayed. 304 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 304
SETUP D To edit "Phone #" (telephone number) 1. Touch "Edit" of "Phone #". 2. Enter the number using number keys. 3. Touch "OK". The previous screen will be displayed. 305 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 305
SETUP 306 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 306
APPENDIX SECTION APPENDIX Appendix D Limitations of the navigation system D Map database information and updates 9 308 310 Changing the map DVD−ROM ...319 307 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 307
GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems. 308 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 308
vehicle cannot receive GPS signals, you can correct the current position manually may not be available for the next vehicle that vary by time or season or other reasons. D The road and map data stored in your navigation system may not be complete or may not be the latest version. 309 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 309
the "TIRE CHANGE CALIBRATION". (See page 253.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing Bullseye Design is a registered trademark of Target Brands, Inc. 310 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 310
from or publish any part of the DATABASE without , decompile, or reverse engineer any portion of the DATABASE system for which it was created, provided that you do not retain any copy of the DATABASE, and provided that the transferee agrees to all terms and conditions of this AGREEMENT. 311 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 311
, LOST PROFITS OR COSTS OF COVER, LOSS of time, changing circumstances, and work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; traffic congestion; or travel time. 312 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 312
between any of the FAR and DFARS provisions listed herein and this Agreement, the construction that provides part, for any reason, this Agreement shall be considered terminated and null and void, in its entirety, and any and all copies of the DATABASE shall immediately be destroyed. 313 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 313
engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Multi−disc sets may only be transferred or sold as a complete set as provided by DENSO and not as a subset thereof. 314 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 314
systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 315
not to export from anywhere any part of the Data provided to you provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction Data. 316 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 316
SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part −commercial purposes, and not for service bureau, time−sharing or other may not decompile, disassemble or reverse engineer any portion of this information, and 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 317
death), demand, action, cost, expense, or claim from the current vehicle position to the system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing of an update. 318 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 318
APPENDIX - Changing the map DVD−ROM U009ADNS U035ADNS 1. Push the "INFO/PHONE" button. 4. Insert a new map DVD−ROM with the label side up. U036ADNS 2. Touch "Map Data". 5. Push the "LOAD/CLOSE" button to close the display. 3. Touch " DVD". 319 2010 SEQUOIA Navigation from April.09 Prod.( - 2010 Toyota Sequoia | Navigation Manual - Page 319
in the vehicle during sudden braking or moving. It could damage your navigation system. D If a disc cannot be DVD−ROM will be ejected. 2. Touch "Map Data". INFORMATION Under extremely cold dealer to find out if there is a more recent update released. 320 2010 SEQUOIA Navigation from April.09 Prod.( - 2010 Toyota Sequoia | Navigation Manual - Page 320
the distance remaining and the direction to turn in approaching an intersection. These voice instructions will help you keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down. 1 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 321
perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 308 through 309. 2 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 322
. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route - 2010 Toyota Sequoia | Navigation Manual - Page 323
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2010 Toyota Sequoia | Navigation Manual - Page 324
Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. This figure indicates the map scale. Push this button to display the " Page 43 42 31 42 5 "AAOff" 251 6 "Mark" 35 5 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 325
the "Information" screen. Touch this button to change the screen mode. Push this button to display the System) This mark is displayed when XMr NavTraffic information is received. Whenever the vehicle is receiving signals from the GPS, this mark is displayed. 83 98 17 18 308 6 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 326
registered, you can register it by touching "Go Home". 3 Touch "Yes". 4 There are 4 different methods to search your home. See "Destination search" on page 52. 7 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 327
"OK". Registration of home is complete. You can also register home by touching the "SETUP" button. (See " (a) Registering home" on page 103.) You can change the name, location, phone number and icon. (See " (b) Editing home" on page 104.) 8 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 328
preset destination button that has not yet been set. 3 Touch "Yes". 4 There are 4 different methods to search preset destinations. See "Destination search" on page 52. 9 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 329
on page 106.) You can change the name, location, phone number and icon. (See " (b) Editing preset destinations" on page 107.) The registered points can be used on the "Destination" screen. (See " - Destination search by Preset destinations" on page 54.) 10 2010 SEQUOIA Navigation from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 330
The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 72.) 5 Guidance to the destination is given via voice and on the guidance screen. 11 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 331
The navigation system performs a search for the route. 4 Touch "OK", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 72.) 5 Guidance to the destination is given via voice and on the guidance screen. 12 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 332
in the "Address book". (To register address book entries, see "(a) Registering address book entries" on page 109.) ...66 7 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...66 5 13 2010 SEQUOIA Navigation from April - 2010 Toyota Sequoia | Navigation Manual - Page 333
will automatically appear. To use this function, it is necessary to set a "Home" address. (To register "Home", see "(a) Registering home" on page 103.) ...54 14 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 334
, POI icon categories, etc...245 "Audio" Settings are available for portable audio devices, Bluetoothr audio devices etc...293 6 7 "Phone" Bluetoothr phones and phone numbers can be registered, and the receiver volume can be adjusted...254 15 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 335
hands free phone information...126 2 "Map Data" Displays information regarding the map data disc version or coverage area...319 3 "Calendar" To view calendar...142 16 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 336
17 2010 SEQUOIA Navigation from April.09 Prod.(OM34487U) - 2010 Toyota Sequoia | Navigation Manual - Page 337
letters and numbers/List screen operation D Function help D Map screen operation Current position display ...Screen scroll operation ...Switching the screens ...Map scale ...Foot print map ...Orientation of the map ... 1 22 23 25 25 29 29 29 30 34 36 37 38 2010 SEQUOIA Navigation Entry from - 2010 Toyota Sequoia | Navigation Manual - Page 338
2 , 3 and then back to 0 in the reverse order. If the engine switch is set at OFF, the display will automatically move back to position 0 . The system. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. 22 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 339
and then change to the map screen in about 5 seconds later or if the "MAP/VOICE" button is pushed. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds, the "CAUTION" screen will be displayed. 2010 SEQUOIA Navigation Entry - 2010 Toyota Sequoia | Navigation Manual - Page 340
to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the "Information" screen will be displayed when the navigation system is in operation - 2010 Toyota Sequoia | Navigation Manual - Page 341
This system is operated mainly by the touch screen buttons on the screen. To prevent damage to the screen, lightly touch buttons change the angle of the screen, look at the screen from different angles, adjust the screen settings on the "Display" screen, or take off your sunglasses. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 342
button, letters will continue to be erased. : Touching this button displays other symbols. 1U5006F : To enter in lower case. : To enter in upper case. 26 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 343
four or less, the list is displayed without touching "List". To shift to the system displays on the screen. If appears to the right of the item name, the complete name is too long for the display. Touch to scroll to the end of the name. Touch to scroll to the beginning of the name. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 344
list displayed on the screen can be rearranged. TYPE A TYPE B 1U5012F 1U5010F 1. Touch "Sort by". "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle order by attribute. 28 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 345
. INFORMATION D After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see page 116. 2010 SEQUOIA Navigation Entry from - 2010 Toyota Sequoia | Navigation Manual - Page 346
When the one−touch scroll feature is used, the current vehicle position mark may disappear from the screen. Move the map with a one−touch scroll again or push the "MAP/VOICE" button to return to the current vehicle position map location display. 30 2010 SEQUOIA Navigation Entry from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 347
the cursor position as a memory point Memory point registration enables easy access to a specific point. To change the icon or name, etc., see " - Editing memory points" on page 96. Up to The registered point is shown by map. on the 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 31 - 2010 Toyota Sequoia | Navigation Manual - Page 348
"Mark". (See page 95.) INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 80.) 32 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 349
page 96.) To delete a memory point, touch "Delete". 1U5062F Information such as the name, address, and phone number are displayed. To delete a destination, touch "Delete". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 33 - 2010 Toyota Sequoia | Navigation Manual - Page 350
screen. (See page 35.) : To display the compass mode screen. (See page 36.) : To display the turn list screen. (See page 70.) : To display the arrow screen. (See page 70.) : To display the freeway screen on the freeway. (See page 69.) 34 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 351
can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Show XMr NavTraffic Info. (See page 118.) 4. Changing the orientation of the map Touch "OK" when you complete editing. The screen returns to the dual map screen. 2010 SEQUOIA Navigation Entry from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 352
and the compass, to make sure that your vehicle is headed in the direction of the destination. Touch or to change the scale of the map display. The scale print map is available the map scale changes from to when at the minimum range. 36 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 353
To switch to the foot print map changes into when the map is scaled down to 150 feet (50 m). D To display building information Information is available only for buildings for which information is information. 3. Touch "Building Info.". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 37 - 2010 Toyota Sequoia | Navigation Manual - Page 354
of the map The orientation of the map can be changed from North−up to Heading−up by touching the orientation symbol direction of vehicle travel, North is always up. Heading−up symbol The direction of vehicle travel is always up. A red arrow indicates North. 38 2010 SEQUOIA Navigation Entry - 2010 Toyota Sequoia | Navigation Manual - Page 355
set destinations ...D Starting route guidance 2 40 41 42 44 44 45 49 56 57 57 58 59 59 60 61 75 63 ∗: Point of Interest 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 39 - 2010 Toyota Sequoia | Navigation Manual - Page 356
6 "Emergency" One of the four categories of emergency service points that are already stored in the system's database can be selected...57 7 "Map" A destination can be selected simply by touching the location on the displayed map...59 40 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 357
viewed on this screen...29 11 "Del. Dest." Set destinations can be deleted...62 12 "Change" To change the selected region to search, touch this button...42 13 Quick access touch screen buttons One the touch screen button may be slow. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 41 - 2010 Toyota Sequoia | Navigation Manual - Page 358
or "Intersection". 2U5069F 2U5004aF 2. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 12 regions. (For map database to search. 3. Touch "OK" and the previous screen returns. 42 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 359
Virginia Florida Georgia North Carolina South Carolina Hawaii Canada "US3" Button "CAN" Provinces and regions included in the search region All provinces and regions in Canada included in this button. "US4" "US5" "US6" "US7" "US8" 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U - 2010 Toyota Sequoia | Navigation Manual - Page 360
the "Destination" screen. The screen changes and displays the map location for vehicle position to your home if "Enter" is touched even while driving. INFORMATION Guidance starts from the current vehicle position to the quick access point if "Enter" is touched even while driving. 44 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 361
. It is possible to input a street name first. Touch "Street" to display the screen for inputting a street name. 2U5010F 2. Input the street name and touch "List". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 45 - 2010 Toyota Sequoia | Navigation Manual - Page 362
. 2U5012F 4. Select or enter the desired city. "Input Name": To narrow down the listed items by inputting the city name. 2U5015F If the same address exists in more than one city, the current screen changes to the city list screen. 46 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 363
3. Touch the button of the desired city name from the displayed list. "Map": To display the selected destination and the route preference. ( INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 2010 SEQUOIA Navigation Entry from - 2010 Toyota Sequoia | Navigation Manual - Page 364
the button of the desired city name from the displayed list. The current screen changes to the screen for inputting a house number or a street changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 45.) 48 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 365
changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) When inputting the name of a specific Point of Interest, and there are two or more sites with the same name, the list screen is displayed. 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 366
INFORMATION The desired Point of Interest can be displayed on the map screen. (See " - Display POI icons" on page 80.) INFORMATION D To change the selected region, touch "Select Region". D To cancel the city setting, touch "Any City". 50 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 367
2. Input the city name. 2U5029F 2. Touch the button of the desired city name. 2U5028F 3. Touch the button of the desired city name from the displayed list. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 51 - 2010 Toyota Sequoia | Navigation Manual - Page 368
the name to display a detailed list of the POI category. If the desired POI category is not on the screen, touch "List All Categories" to list all POI categories. 2U5034F When the desired category is touched, the POI name list screen is displayed. 52 2010 SEQUOIA Navigation Entry from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 369
. Releasing the finger from the arrow will stop the scrolling. 4. Touch "Enter". The search point is set and the "POI Category" screen will be displayed. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 53 - 2010 Toyota Sequoia | Navigation Manual - Page 370
the finger from the arrow will stop the scrolling. 2. Touch "Enter". The search point is set and the "POI Category" screen will be displayed. 54 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 371
POI category is not on the screen, touch "List All Categories" to list all POI categories. 2U5042F Select the desired POI categories from the list and touch "OK". The selected category icon appears on the top left of the screen. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 55 - 2010 Toyota Sequoia | Navigation Manual - Page 372
button of the desired item, the screen changes and displays the map location of the list of identical numbers with different area codes will be displayed. D To set a memory point as a destination using the phone number, the number must be registered previously. (See page 101.) 56 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 373
displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page 183.) 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 57 - 2010 Toyota Sequoia | Navigation Manual - Page 374
previous points in the system. 2U5081F 2U5082F The . The screen changes and displays the list of previous destinations can also be deleted by touching "Delete Previous Points" on the "My Places" screen when the vehicle is stopped. (See " - Deleting previous points" on page 108.) 58 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 375
4. Touch the button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 59 - 2010 Toyota Sequoia | Navigation Manual - Page 376
2U5106X 2U5052F If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city a freeway "Entrance" or "Exit" can be selected. 60 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 377
"Starting route guidance" on page 63.) "Input Name": An applicable list is displayed by touching this button and inputting the name. 3. Input changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 63.) 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 378
deleting the destinations. The system searches for the guidance list. 2U5079F A message appears to confirm the request to delete. 4. To delete the destination(s), touch "Yes". If "Yes" is touched, the data cannot be recovered. If "No" is touched, the previous screen will return. 62 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 379
existing destinations and set a new one. "Route Preference": To change the route preference. (See page 64.) "Info.": If this button is displayed on the top of the screen, touch it to view items such as name, address, and phone number. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 63 - 2010 Toyota Sequoia | Navigation Manual - Page 380
route without traffic congestion. D Route guidance may not be available if there is no road data for the specified location When searching for a route, the system will avoid routes when the indicator changed, the route guidance may provide wrong information. 64 2010 SEQUOIA Navigation Entry from April - 2010 Toyota Sequoia | Navigation Manual - Page 381
, the route guidance shows a sea route. After you travel by ferry, the current vehicle position may be incorrect. Upon reception of GPS signals, it is automatically corrected. 2U5063F following information about each of the 3 routes. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 65 - 2010 Toyota Sequoia | Navigation Manual - Page 382
09 01.08 DESTINATION SEARCH 2U5065F 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll road Freeway Ferry 66 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 383
overview ...Route preview ...Route trace ... 3 68 71 73 74 74 74 75 76 76 77 79 79 80 80 82 83 84 ∗: Point of Interest 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 67 - 2010 Toyota Sequoia | Navigation Manual - Page 384
to the destination Current position Guidance route 1 2 3 4 5 INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For some areas, the exits. : To scroll for the closest three junctions or exits. 68 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 385
the freeway will be displayed. D When approaching an intersection When the vehicle approaches an intersection, the intersection guidance screen will be displayed. 3U5003F MAP/VOICE" button, the intersection guidance screen reappears. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 69 - 2010 Toyota Sequoia | Navigation Manual - Page 386
08 ROUTE GUIDANCE D Other screens TURN LIST SCREEN On this screen, the list of turns on the guidance route can be viewed. Touching the turn list. during guidance displays ARROW SCREEN On between turns Current street name 2 3 4 70 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 387
provides various messages as you approach an intersection, or other point where you need to maneuver the vehicle. 4.2 miles 0.25 miles 4.7 miles 0.25 miles +α 3U5120X 3U5119X 1 "Proceed about 4 in order to allow time to maneuver. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 71 - 2010 Toyota Sequoia | Navigation Manual - Page 388
vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not hear the voice guidance command, push the "MAP/ VOICE" button to hear it again. D To adjust the voice guidance volume, see "Volume" on page 91. 72 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 389
and arrival time is calculated based on the set vehicle speed information. (See page 109.) However, when the vehicle is not on the guidance route, the distance is the linear distance between the current position and the destination. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 73 - 2010 Toyota Sequoia | Navigation Manual - Page 390
can be done. - Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 3U5009F 1. Touch "Route". 3U5012F 1. Touch "Route". order number from the previously input number. 74 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 391
selecting the destinations, touch "OK". The system searches for the guidance route again, and list will be displayed on the screen. 3U5017F 3. Touch the destination for deletion. "Delete All": To delete all destinations on the list. A message appears to confirm the request to delete. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 392
If more than one destination is set, touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. You can designate Quick", "Quick1", "Quick2" or "Short" and touch "OK". 76 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 393
an accident, etc. 3U5021F The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 74 and 76.) 3U5022F 1. Touch "Route". 3U5023F 2. Touch "Detour". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 77 - 2010 Toyota Sequoia | Navigation Manual - Page 394
of how the system would guide around a system. INFORMATION D When your vehicle is on a freeway, the detour distance selections are 5, 15, and 25 miles (km). D The system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions. 78 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 395
vehicle is driven parallel along the freeway.) 3U5025F 3U5028F 1. Touch "Route". 1. Touch "Route". 3U5026F 3U5029F 2. Touch "Route Preference" to change the system will avoid routes when the indicator is off. 4. After choosing the desired route preference, touch "OK". 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 396
of Interest, touch this button. Then choose one of the categories. The system will list the points within 20 miles (32 km). (See page 81.) 3U5031F 2. Points of Interest will be displayed. (To change the displayed POI, see page 112.) 80 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 397
from the list. The selected category icon appears on the top left of the screen. By selecting the desired POI category and then touching "OK", the selected POI icons are displayed on the map screen. To return to the POI category selection screen, touch "More". 2010 SEQUOIA Navigation Entry - 2010 Toyota Sequoia | Navigation Manual - Page 398
route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 74 and 76.) "Turn List": The following screen displays the list of the roads up to the destination. 82 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 399
the direction in which you should turn at an intersection. Touch "Map" on the "Turn List" screen. The point which you choose is displayed on the map screen. 3U5044F 1. Touch "Map View". 3U5045F 2. Touch "Route Preview". 3U5043F 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 83 - 2010 Toyota Sequoia | Navigation Manual - Page 400
up to 124 miles (200 km) and retrace the route on the display. 3U5046F INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). : To indicate the starting point. Touch "Map View". 3U5047F 84 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 401
screen. 3U5049F Touching "Yes" stops recording and the route trace remains displayed on the screen. Touching "No" stops recording and the route trace is erased. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 85 - 2010 Toyota Sequoia | Navigation Manual - Page 402
09 01.08 ROUTE GUIDANCE 86 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 403
...103 Registering area to avoid ...103 Editing area to avoid ...104 Deleting area to avoid ...107 Deleting previous points ...108 D Setup 108 D XM NavTraffic 118 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 87 - 2010 Toyota Sequoia | Navigation Manual - Page 404
the "Menu" screen can be viewed on this screen...29 4 "Map DVD" Displays information regarding the disc version or covered area...194 1 5 " system...89, 108 8 "My Places" Enables changes to "Memory points", "Home" and "Areas to avoid". Enables deletion of the previous point...94 88 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 405
miles" can be selected...109 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination set...109 3 "Keyboard Layout" Key layout can be changed...110 4 "Time Zone" The desired time zone can be 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 89 - 2010 Toyota Sequoia | Navigation Manual - Page 406
−up message is possible...115 12 "Calibration" Adjustment of the current vehicle position mark can be done manually...116 13 "Default" This touch screen button initializes all of the settings current position map without route guidance. 90 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 407
U503ADNS 1. Push the "MENU" button. 4U5004F 4U5087F The screen will change to the current position map with route guidance. 2. Touch "Volume". to disable the feature. When selected the number or "OFF" will be highlighted. 3. Touch "OK" to confirm your selection. 2010 SEQUOIA Navigation Entry from - 2010 Toyota Sequoia | Navigation Manual - Page 408
screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 1. Push the "MENU" button. 4U5088F 2. Touch "Select User". 92 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 409
09 01.08 ADVANCED FUNCTIONS D To register D To change user 4U5008F 1. Touch "Memorize". The confirmation screen will be displayed. 4U5011F Touch appears. 4U5010F To replace, touch "Yes". To cancel the re. placement, touch "No" or 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 93 - 2010 Toyota Sequoia | Navigation Manual - Page 410
displayed. U503ADNS 4U5014F 1. Push the "MENU" button. 2. To delete, touch "Yes". To return to the previous screen, touch "No" or . 4U5089F 2. Touch "My Places". 94 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 411
same way as for a destination search. (See "Destination search" on page 41.) After memory point registration is completed, the "Memory Point" screen will be displayed. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 95 - 2010 Toyota Sequoia | Navigation Manual - Page 412
memory points" on page 96. 4U5020F 3. Touch "Edit". INFORMATION Up to 106 memory points can be registered. 4U5021F 4. Touch the desired memory point button. 96 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 413
09 01.08 ADVANCED FUNCTIONS D To change "Icon" 1. Touch "Icon" on the "Memory Point" screen. 4U5022F 4U5023F 5. Touch the button 6. Touch "OK". 2. Touch the desired icon. Turn the page by touching "Page 1", "Page 2" or "with Sound". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 97 - 2010 Toyota Sequoia | Navigation Manual - Page 414
bell sounds only when the vehicle approaches this point in the direction that has been set. 3. To replace the attribute, touch "Yes". To return to the previous screen, touch "No" or . INFORMATION One "Home" and five "Quick Access" can be set. 98 2010 SEQUOIA Navigation Entry from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 415
09 01.08 ADVANCED FUNCTIONS DELETING "Quick Access" D To change "Name" 1. Touch "Name" on the "Memory Point" screen. 4U5028F 4U5030F 1. Touch "Del delete an attribute, touch "Yes". To return to the previous screen, touch . "No" or 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 99 - 2010 Toyota Sequoia | Navigation Manual - Page 416
POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. 4U5031F To show the name, touch "ON The previous screen will be displayed. 100 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 417
09 01.08 ADVANCED FUNCTIONS - Deleting memory points D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory delete all memory points in the system. 5. To delete the memory point, touch "Yes". To cancel the deletion, touch "No". 2010 SEQUOIA Navigation Entry from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 418
" on page 96. 4U5036F 3. Touch "Register". 4U5091F 4. Enter the location in the same way as for a destination search. (See "Destination search" on page 41.) 102 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 419
"Menu" screen. - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 1. Push the "MENU" button. 2. Touch on the map. 6. Touch "Enter". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 103 - 2010 Toyota Sequoia | Navigation Manual - Page 420
Touch either or to change the size of the area to be avoided. 8. Touch "OK". 4U5044F 3. Touch "Edit". INFORMATION D If a destination is input in the area to avoid or the route calculation cannot be made without running 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 421
to Avoid" screen. To turn off the feature touch "OFF" on the "Edit Area to Avoid" screen. 6. Touch "OK". 2. Enter the name using alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK". The previous screen will be displayed. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 105 - 2010 Toyota Sequoia | Navigation Manual - Page 422
The name of an area to be avoided that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Edit Area to Avoid" screen. 4U5048F To show the name, "Enter". The previous screen will be displayed. 106 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 423
to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be displayed. 4U5052F 4. Touch the button to be deleted. "Delete All": To delete all registered areas to avoid in the system. 5. To delete the area, touch "Yes". To cancel the deletion, touch "No". 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 424
the system. 4U5093F 2. Touch "Setup". 4U5094F 4U5055F 3. Touch the items to be set. 5. To delete the point, touch "Yes". To cancel the deletion, touch "No". 4. Touch "OK". The previous screen will be displayed. INFORMATION To reset all setup items, touch "Default". 108 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 425
can be changed. 1. Push Travel Time". INFORMATION This function is available only in English or Spanish. To vehicle speeds for "Residential", "Main street", and "Freeway". To set the default speeds, touch "Default". 5. After setting of the desired speeds is completed, touch "OK". 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 426
, and construction work. D It is possible to display up to 99 hours 59 minutes. Key layout can be changed. 1. Push the "MENU" button. 2. Touch "Setup" on the "Menu" screen. 4U5097F 3. Touch "ABC" or "QWE" of "Keyboard Layout" to choose the input key layout. 110 2010 SEQUOIA Navigation Entry from - 2010 Toyota Sequoia | Navigation Manual - Page 427
button. 2. Touch "Setup" on the "Menu" screen. 4U5062F " "ABC" type 4U5098F 3. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. 4U5063F " and to cancel it, touch "OFF". 5. Touch "OK". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 111 - 2010 Toyota Sequoia | Navigation Manual - Page 428
4U5100F 3. Touch "Change" of " Function". 3. Touch "Change" of "Display POI Icons". 4U5097F 4. Touch the button to be turned off. The button becomes dimmed. To set the default, touch "Default". 5. Touch "OK". 4U5069F 4. Touch the category button to be changed. 112 2010 SEQUOIA Navigation Entry - 2010 Toyota Sequoia | Navigation Manual - Page 429
FUNCTIONS D Display of building shape When the "Display Building Shapes" feature is turned on, the system will display the building shape on the map screen using a Building Shapes". The selected button is highlighted. 4. Touch "OK". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 113 - 2010 Toyota Sequoia | Navigation Manual - Page 430
can be heard. When the "Voice Guidance in All Modes" feature is turned off, voice guidance cannot be heard when using the audio system. To turn the "Voice Guidance in All Modes" on: 1. selected button is highlighted. 4. Touch "OK". 114 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 431
guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the "Auto Voice Guidance" feature is turned off, the voice guidance The selected button is highlighted. 4. Touch "OK". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 115 - 2010 Toyota Sequoia | Navigation Manual - Page 432
not displayed. D Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused accuracy of a current vehicle position, see "Limitations of the navigation system" on page 182. 116 2010 SEQUOIA Navigation Entry from April - 2010 Toyota Sequoia | Navigation Manual - Page 433
or to adjust the direction of the current vehicle position mark. 5. Touch "Enter". The map screen will be displayed. 4U5082F 2. Touch the eight directional touch screen button to move the cursor to the desired point on the map. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 117 - 2010 Toyota Sequoia | Navigation Manual - Page 434
is not performed when the tires are replaced, the current vehicle position mark may be incorrectly displayed. The XMr NavTraffic service that allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. To - 2010 Toyota Sequoia | Navigation Manual - Page 435
route, it may be possible for you to select another route offered by the system. (See page 121.) 3 Traffic Voice Guidance Traffic information is provided using voice guidance and "Show Free Flowing Traffic" will not operate. 4U5108F 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 119 - 2010 Toyota Sequoia | Navigation Manual - Page 436
will appear on the map screen. The color of the arrow changes depending on the traffic information received. "Orange": Heavy congestion "Yellow": Moderate traffic "Green": Freely flowing traffic 4U5110F " Freeway information screen 120 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 437
received, the XMr NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. "White": Traffic information has been . If you do not wish to reroute, touch "No". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 121 - 2010 Toyota Sequoia | Navigation Manual - Page 438
You can receive congestion information through voice guidance while being guided to your destination. (d) Show Free Flowing Traffic Freely INFORMATION This function is available only in English. To switch language, see "Selecting a language" on page 139. 122 2010 SEQUOIA Navigation Entry from - 2010 Toyota Sequoia | Navigation Manual - Page 439
map, the XMr NavTraffic info. bar will appear on the upper part of the screen. 5U5B03F 1. Touch "Info." to display the "Traffic Information" screen. 5U5B04F 2. Touch "Detail" to display detailed traffic event information. 5U5B05F 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 123 - 2010 Toyota Sequoia | Navigation Manual - Page 440
09 01.08 ADVANCED FUNCTIONS 124 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 441
information Maintenance information setting ...Dealer setting ...D Calendar with memo Adding a memo ...Editing a memo ...Memo list ...D Screen adjustment D Screen setting D Beep setting D Selecting a language 5 126 126 128 130 132 133 133 135 136 139 139 2010 SEQUOIA Navigation Entry from April - 2010 Toyota Sequoia | Navigation Manual - Page 442
when the system is turned on. (See page 24.) If "OFF" is selected, the "Information" screen is disabled. When the vehicle needs to be serviced, the touch screen button color will change to orange. U504ADNS 1. Push the "INFO" button. 5U5B09F 2. Touch "Maintenance". 126 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 443
": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF (Automatic Transmission Fluid) "SERVICE": Scheduled maintenance "AIR FILTER": Replace air filter "PERSONAL - 2010 Toyota Sequoia | Navigation Manual - Page 444
has not been registered, enter the location of the dealer in the same way as for a destination search. (See "Destination search" on page 41.) When "Set Dealer" registration is finished, the "Edit Dealer" screen will be displayed. 128 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 445
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 5U5006F 2. Enter previous screen will be displayed. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 129 - 2010 Toyota Sequoia | Navigation Manual - Page 446
Phone #" on the "Edit Dealer" screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page the "INFO" button. 5U5B10F 2. Touch "Calendar". 130 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 447
To display the current month calendar (if another month will be displayed). "List": To display the list of registered memos. (See " - Memo list" on page 133.) Touching a date button on the "Calendar" screen displays the "Memo" screen. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 131 - 2010 Toyota Sequoia | Navigation Manual - Page 448
01.08 OTHER FUNCTIONS - Adding a memo If a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 24.) 1. Push the "INFO "Destination search" on page 41.) 5U5013F 5. Touch "Memo". 132 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 449
a memo" on page 132.) "Location": To change a registered location. (See " - Adding a memo" on page 132.) "Enter ": To set the registered location as a destination. (See "Starting route guidance" on page 63.) "Delete": To delete the memo. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U - 2010 Toyota Sequoia | Navigation Manual - Page 450
the numeral keys. The period from January 1, 2007 through December 31, 2026 can be set for searching. 3. After setting the period, touch "OK". The "Memo List" screen will be displayed. 134 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 451
display off, and change the screen to back on, push any button such as "DISP/TILT", etc. The selected screen appears. U502ADNS 1. Push the "DISP/TILT" button. INFORMATION When you do not touch any button on the "Display" screen for 20 seconds, the previous screen will be displayed. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 452
screen for brightness and contrast control. If the screen is set in the day mode with the headlight switch turned on, this condition is memorized in the system even with the engine turned off. 5U5B11F 2. Touch "Screen Setting". 136 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 453
enables automatic return to the navigation screen from the audio screen. (b) Switch color You can select the color of the touch screen buttons. 5U5A83F Select "ON" or "OFF" and 5U5A84F Select "Green" or "Orange" and then touch "OK". 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 137 - 2010 Toyota Sequoia | Navigation Manual - Page 454
This function is available only when the vehicle is not moving. 5U5A85F 1. Touch "Delete personal data". The "Delete personal data" screen appears. 5U5A86F 2. Touch "Delete". The "Confirmation to delete all personal data" screen appears. 5U5A87F 3. Touch "Yes". 138 2010 SEQUOIA Navigation Entry - 2010 Toyota Sequoia | Navigation Manual - Page 455
and the voice guidance can be changed. U504ADNS U504ADNS 1. Push the "INFO" button. 1. Push the "INFO" button. 5U5B12F 5U5B02F 2. Touch "Beep Off". "Beep Off" is highlighted. To switch the beep sound on, touch "Beep Off" again. 2. Touch "Language". 2010 SEQUOIA Navigation Entry from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 456
other than for the navigation system is displayed, the current screen would change to the "CAUTION" screen by pushing the "MAP/VOICE", "DEST" or "MENU" button. 4. Touch "OK". The language is changed and the screen returns to the map display. 140 2010 SEQUOIA Navigation Entry from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 457
09 01.08 AUDIO SYSTEM SECTION AUDIO SYSTEM Audio system D Quick reference D Using your audio system Some basics ...Radio operation ...CD player operation ...D Audio remote controls D Audio system operating hints 6 142 143 143 147 155 166 167 141 2010 SEQUOIA Navigation Entry from April.09 Prod.( - 2010 Toyota Sequoia | Navigation Manual - Page 458
, see pages 155 and 157. "DISC·AUX" button Push this button to turn the CD player and AUX on. For details, see pages 144, 146 and 157. 5 6 3 7 turn the audio system on and off, and turn it to adjust the volume. For details, see page 143. 142 2010 SEQUOIA Navigation Entry from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 459
off NOTICE To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. U505ADNS CAUTION For vehicles sold in U.S.A. and Canada: D Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not expressly - 2010 Toyota Sequoia | Navigation Manual - Page 460
09 01.08 AUDIO SYSTEM D Switching between functions 6U5D70F U506ADNS Push "AM·SAT", "FM 6U5D71aF 6U5D72aF The function buttons for radio and CD player operation are displayed on the screen when the audio control mode is selected. 144 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 461
01.08 AUDIO SYSTEM Touch them lightly and directly and of the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left 6U5D73aF 2. Touch "SOUND". 145 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 462
for use with 12 cm (4.7 in.) discs only. D AUX adapter The sound of portable audio players connected to the AUX adapter can be enjoyed. Push the "DISC·AUX" button to switch to AUX mode. For details, refer to the "Owner's Manual". 146 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 463
appears on the screen. If your vehicle is equipped with a satellite radio broadcast system, when you push the "AM·SAT up or step down the station band. Your radio automatically changes to stereo reception when a stereo broadcast is received. 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 464
09 01.08 AUDIO SYSTEM D Presetting a station D Selecting a station Tune in the desired change the preset station to a different one, follow the same procedure. The preset station memory is cancelled when the power source is interrupted by battery disconnection or a blown fuse. 148 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 465
activation and service subscription fees apply that are not included in the purchase price of the vehicle and optional digital satellite tuner. For detailed information about XMr Satellite Radio or to subscribe: U.S.A.- Visit on the web at www.xmradio.com or call 1−800−967−2346. Canada- Visit on - 2010 Toyota Sequoia | Navigation Manual - Page 466
09 01.08 AUDIO SYSTEM D Listening to satellite radio D Channel category U511ADNS 6U5D80F Touch either "TYPEA" or "TYPE"" to go to the channel. If you turn continuously, you can rapidly scroll forward or down through the channels. 150 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 467
09 01.08 AUDIO SYSTEM D Presetting a channel 1. Tune in the desired channel. D Selecting change the preset channel to a different one, follow the same procedure. The preset channel memory is cancelled when the power source is interrupted by battery disconnection or a blown fuse. 151 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 468
09 01.08 AUDIO SYSTEM D Displaying the title and name 6U5D82F To scan the currently selected name/feature are displayed. Up to 16 alphanumeric characters can be displayed. (Some information will not be fully displayed.) When you touch "TEXT" again, the display returns. 152 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 469
returns to the previous channel or "CH001". If it does not change automatically, select another channel. Care Center at 1−800−967−2346 (U.S.A.) or ANTENNA NO SIGNAL LOADING OFF AIR Contact the XMr Listener 1−877−438−9677 (Canada). 153 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 470
INFORMATION This XMr tuner supports "Audio Services" (Music and Talk) of only XMr Satellite Radio and "Text Information"* linked to the respective "Audio Services". *Text Information includes, Station Name, (Artist) Name, (Song) Title and Category Name. 154 2010 SEQUOIA Navigation Entry from April - 2010 Toyota Sequoia | Navigation Manual - Page 471
text ...158 D MP3/WMA disc ...161 For appropriate discs for this changer, see "Audio system operating hints" on page 167. (a) Inserting discs The engine switch must be set at "ACC" or "ON" position. U509ADNS 1. Push the " " button. 155 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 472
In this case, "CD Check" appears on the screen. NOTICE Do not obstruct the display while it is moving. It could damage your audio system. INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. 156 2010 SEQUOIA Navigation Entry from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 473
in the CD player. The "CD" screen will be displayed. NOTICE If a disc cannot be ejected, do not forcibly take out the disc. Keep pushing the " " button for approximately 5 seconds and release it. At this time, the audio disc and the map DVD− ROM will be ejected. 157 2010 SEQUOIA Navigation Entry - 2010 Toyota Sequoia | Navigation Manual - Page 474
09 01.08 AUDIO SYSTEM (d) Operating an player will start playing the selected track from the beginning. "TRACK LIST": The desired track can be selected from a list. This function is available only when the vehicle is not moving. Touch "TRACK LIST". The track list is displayed. 158 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 475
next track for 10 seconds, then scan again. To select a track, touch "SCAN" once again. If the CD player reaches the end of the disc, it will start playing at track 1. After all the tracks are scanned in one pass, normal play resumes. 159 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 476
on the screen. The system selects a track on the disc being listened to in random order. To cancel it, touch "RAND" once again. If a CD−TEXT disc is inserted, the title of the disc and track will be displayed. Up to 29 letters can be displayed. 160 2010 SEQUOIA Navigation Entry from April - 2010 Toyota Sequoia | Navigation Manual - Page 477
when the last page of the list is displayed, the top page is displayed. "FILE": The file list is displayed. "DETAIL": Details of the file currently playing is displayed. This function is available only when the vehicle is not moving. 161 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U - 2010 Toyota Sequoia | Navigation Manual - Page 478
09 01.08 AUDIO SYSTEM D Selecting a desired file 6U5D90aF U508ADNS "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. "TUNE·SEEK/TRACK" button: Use for direct access to a desired file. Push - 2010 Toyota Sequoia | Navigation Manual - Page 479
list is displayed, the top page is displayed. "FOLDER": The folder list is displayed. "DETAIL": Details of the file currently playing is displayed. This function is available only when the vehicle is in one pass, normal play resumes. 163 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 480
09 01.08 AUDIO SYSTEM D Searching for a desired folder D Other functions 6U5D93aF While folder is finished, the CD player will automatically go back to the beginning of the folder and play the folder again. To cancel it, touch "RPT" once again. 164 2010 SEQUOIA Navigation Entry from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 481
Check" will also appear on the screen. For appropriate discs for this player, see "Audio system operating vehicle to your dealer. If an MP3/WMA disc contains CD−DA files, only CD−DA files are played. If an MP3/WMA disc contains files other than CD−DA, only MP3/WMA files are played. 165 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 482
the seek mode will cancel. CD player Use this button to skip up parts of the audio system can be adjusted with the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1 Volume control switch 2 "MODE" switch 3 " " " " switches 166 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 483
farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with your radio: 167 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 484
system. D When naming an MP3 or WMA file, add the appropriate file extension (.mp3 or .wma). D The MP3/WMA player plays back function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. (The system can play MP3 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 485
some damaged discs. D If you insert a CD−RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional CD or CD−R disc. D Recordings on CD−R/CD−RW cannot be played using the DDCD (Double Density CD) system. 169 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 486
09 01.08 AUDIO SYSTEM CARING FOR YOUR CD PLAYER AND DISCS D Your CD player is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperature can keep your CD player from working. On hot days, use air conditioning to cool the vehicle interior before you listen to a disc. D Bumpy - 2010 Toyota Sequoia | Navigation Manual - Page 487
of such discs may damage the player or changer, or it may be impossible to eject the disc. D This system is not designed for use of audio disc and the map DVD−ROM will be ejected. 6U5B95X " Transparent/translucent discs 6U5B95X " Low quality discs 171 2010 SEQUOIA Navigation Entry from April. - 2010 Toyota Sequoia | Navigation Manual - Page 488
09 01.08 AUDIO SYSTEM 6U5B97X 6U5B98X " Correct " track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store them in their plastic cases away anti−static device. 172 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 489
SYSTEM viewed when the track is played back. WMA Tag- WMA files can working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size size smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8, and 9. 173 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 490
09 01.08 AUDIO SYSTEM 174 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 491
09 01.08 REAR VIEW MONITOR SYSTEM SECTION REAR VIEW MONITOR SYSTEM D Rear view monitor system 7 176 175 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 492
display another screen. The rear view monitor system is a supplement device intended to assist back up. When backing up, be sure to check behind and all around the vehicle visually. D If the back of the vehicle is hit, the position and mounting angle of the camera may change. Be sure to have the - 2010 Toyota Sequoia | Navigation Manual - Page 493
VIEW MONITOR SYSTEM D Area displayed on screen NOTICE When replacing the tires, please consult your Toyota dealer. If you replace the tires, the area displayed on the screen may change. Image is displayed approximately level on screen. U025ADNS " Corners of bumper The area covered by the camera - 2010 Toyota Sequoia | Navigation Manual - Page 494
vehicle orientation or road conditions. The rear view monitor system camera is located on the back door as shown in the illustration. The camera camera D When the camera has scratches or dirt on it D When the sun or the beam of headlights is shining directly into the camera lens 178 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 495
∗: Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera; when transmitted by the camera, the light source appears to have a vertical streak above and below it. 179 2010 SEQUOIA Navigation Entry from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 496
09 01.08 REAR VIEW MONITOR SYSTEM 180 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 497
09 01.08 APPENDIX SECTION APPENDIX Appendix D Limitations of the navigation system D Map database information and updates 8 182 184 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 181 - 2010 Toyota Sequoia | Navigation Manual - Page 498
. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems. 182 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 499
vehicle cannot receive GPS signals, you can correct the current position manually may not be available for the next turn vehicle that vary by time or season or other reasons. D The road and map data stored in your navigation system may not be complete or may not be the latest version. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 500
"TIRE CHANGE CALIBRATION". (See page 118.) This navigation system uses tire turning data and is designed to work with factory− specified tires for your vehicle. Installing Design is a registered trademark of Target Brands, Inc. 184 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 501
data from or publish any part of the DATABASE without , decompile, or reverse engineer any portion of the DATABASE system for which it was created, provided that you do not retain any copy of the DATABASE, and provided that the transferee agrees to all terms and conditions of this AGREEMENT. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 502
, LOST PROFITS OR COSTS OF COVER, LOSS of time, changing circumstances, and work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; traffic congestion; or travel time. 186 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 503
between any of the FAR and DFARS provisions listed herein and this Agreement, the construction that provides part, for any reason, this Agreement shall be considered terminated and null and void, in its entirety, and any and all copies of the DATABASE shall immediately be destroyed. 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 504
engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Multi−disc sets may only be transferred or sold as a complete set as provided by DENSO and not as a subset thereof. 188 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 505
systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 189 - 2010 Toyota Sequoia | Navigation Manual - Page 506
agree not to export from anywhere any part of the Data provided to you or provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the . 190 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 507
SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part commercial purposes, and not for service bureau, time−sharing or may not decompile, disassemble or reverse engineer any portion of this information, and 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) 191 - 2010 Toyota Sequoia | Navigation Manual - Page 508
), demand, action, cost, expense, or claim from the current vehicle position to the system might be different from the actual location. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing of an update. 192 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 509
.08 APPENDIX - Changing the map DVD−ROM U503ADNS 7U5167X 1. Push the "MENU" button. 4. Insert the new map DVD−ROM with the label side up. 5. Push the "CLOSEY" button to close the display. 7U5007F 2. Touch "Map DVD". 7U5008F 3. Touch " DVD−ROM. DVD" to eject the map 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 510
in the vehicle during sudden braking or in an . It could damage your navigation system. D If a disc cannot DVD−ROM will be ejected. 7U5009F 2. Touch "Map DVD". INFORMATION Under extremely cold dealer to find out if there is a more recent update released. 194 2010 SEQUOIA Navigation Entry from April - 2010 Toyota Sequoia | Navigation Manual - Page 511
the distance remaining and the direction to turn in approaching an intersection. These voice instructions will help you keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down. 1 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 512
to perform properly. The accuracy of the vehicle's position depends on the satellite condition, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to pages 182 through 183. 2 2010 SEQUOIA Navigation Entry from April.09 Prod - 2010 Toyota Sequoia | Navigation Manual - Page 513
. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable touch screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route - 2010 Toyota Sequoia | Navigation Manual - Page 514
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2010 Toyota Sequoia | Navigation Manual - Page 515
Function This symbol indicates a map view with north−up or heading−up. Touching this symbol changes the map orientation. This figure indicates the map scale. Push this button to repeat a 41 88, 90, 91, 92, 94, 108, 194 22, 135 3 4 5 6 5 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 516
as a memory point. Touch this button to change the route. Touch this button to browse information about System) This mark is displayed when XMr NavTraffic information is received. Whenever the vehicle is receiving signals from the GPS, this mark is displayed. 73 118 17 18 182 6 2010 SEQUOIA - 2010 Toyota Sequoia | Navigation Manual - Page 517
by touching . 3 There are 11 different methods to search your home. See "Destination search" on page 41. 4 Touch "Enter". The "Memory Point" screen is displayed. 7 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 518
of home is complete. You can also register home by touching the "MENU" button. (See " - Registering home" on page 102.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) 8 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 519
set. 3 There are 12 different methods to search preset memory points. See "Destination search" on page 41. 4 Touch "Enter". The "Memory Point" screen is displayed. 9 2010 SEQUOIA Navigation Entry from April.09 Prod.(OM34488U) - 2010 Toyota Sequoia | Navigation Manual - Page 520
" on page 95.) You can change the icon, quick access, name, location and phone number. (See " - Editing memory points" on page 96.) The registered points can be used on the "Destination" screen. (See " - Destination search by Quick access" on page 44.) 10 2010 SEQUOIA Navigation Entry from April.09 - 2010 Toyota Sequoia | Navigation Manual - Page 521
navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 63.) 5 Guidance to the destination is given via voice and on the guidance screen. 11 2010 SEQUOIA Navigation - 2010 Toyota Sequoia | Navigation Manual - Page 522
navigation system performs a search for the route. 4 Touch "Guide", and start driving. Routes other than the one recommended can also be selected. (See "Starting route guidance" on page 63.) 5 Guidance to the destination is given via voice and on the guidance screen. 12 2010 SEQUOIA Navigation