3Com 3CRWDR200A-75-US User Guide - Page 38
PPPoA Mode, Dial on Demand, VPI/VCI - password
UPC - 662705506258
View all 3Com 3CRWDR200A-75-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
38 CHAPTER 4: RUNNING THE SETUP WIZARD PPPoA Mode Figure 18 The PPPoA Screen To setup the Router for use with a PPPoA connection: 1 Enter your PPP over ATM user name in the PPP User Name text box. 2 Enter your PPP over ATM password in the PPP Password text box. 3 Select Dial on Demand if you want the internet connection dropped when there is no activities with the Internet. Enter an idle time from the Maximum Idle Time drop down list. This is the amount of time without Internet activity that you want to allow before the Router ends the PPPoE session. 4 Manual IP Address/DNS Server configuration: Enter the IP Address that you would like to be assigned to the router's WAN interface if you have required one from your ISP. And enter the DNS Server's IP Address if it is given by your ISP(optional). 5 Check all of your settings, and then click Next. VPI/VCI: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define an ATM PVC(Permanent Virtual Circuit). Please obtain these values from your ISP.