3Com 3CRWE825075ATAA User Guide - Page 23
Connect the free end of the antenna cable to the right-hand side connection on
UPC - 662705487472
View all 3Com 3CRWE825075ATAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Back Back 1 Position the antenna so that there are minimal obstacles between it and any client with which it will communicate. While maintaining a direct line of sight between the antenna and a client is not strictly necessary, such an arrangement helps to ensure a strong signal. Ensure that access is available for routing the antenna cable from the antenna to the access point. 2 If they are installed, remove both arms of the standard detachable antenna, making sure not to handle the tips of the antenna. 3 Connect one end of the optional antenna cable to the antenna and secure the antenna in place. 4 Connect the free end of the antenna cable to the right-hand side connection on the access point, as shown in the illustration above. 5 Make certain that the antennas and antenna masts are appropriately grounded to prevent injury or damage from lightning strikes. 23