3Com 3CRWE850075A User Guide - Page 21
Flat Surface Installation
UPC - 662705467948
View all 3Com 3CRWE850075A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3 Position the access point at an angle to the mounting plate bayonet connection and turn the unit clockwise until it snaps into place, as shown below. Leave at least 13 cm (5 in.) length. Ethernet cable may be routed through center opening or through the side. Hold the access point at an angle. Turn clockwise to engage and secure it on the mounting plate. Hook for securing the cable Side opening Center opening FLAT SURFACE INSTALLATION The access point can also be placed on a flat surface such as a table, desktop or filing cabinet. Do not install the access point on any type of metal surface. If you choose a flat surface mount, select a location that is clear of obstructions and provides good reception. Rotate for best reception. Connect Ethernet cable. Note: Regulatory restrictions dictate that when this device is operational, the minimal body-to-antenna distance is 1 Meter (3 Feet). 21