ASRock 4CoreDual-SATA2 R2.0 User Manual - Page 40
AGP GADSTB Output Delay
View all ASRock 4CoreDual-SATA2 R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
AGP Mode The default value of this feature is set to [Auto]. If you install an 8X-AGP card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP mode as [Auto], [4X], [2X], or [1X]. AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. AGP Aperture Size It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card's specifications requires other sizes. AGP Straggered Delay Use this option to select AGP straggered delay. Configuration options: [Auto], [None], [Delay 1ns]. The default value is [Auto]. AGP GADSTB Output Delay Use this option to select AGP GASSTB output delay. Configuration options: [Auto], [None], [Delay 150 psec], [Delay 300 psec], and [Delay 450 psec]. The default value is [Auto]. V-Link Speed This allows you to set the North Bridge and South Bridge V-Link Speed of VIA chipset. configuration options: [Normal], [Fast]. The default value is [Normal]. V-Link Auto-Disconnect This allows you to enable or disable V-Link Auto-Disconnect function. The default value is [Enabled]. PCI Delay Transaction Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when using ISA cards that are not PCI 2.1 compliant. IDE Drive Strength This allows you to set the drive strength of the onboard IDE controller. Configuration options: [Lowset], [Low], [Normal], and [Highest]. The default value is [Low]. PCIE Downstream Pipeline This allows you to enable or disable the feature of PCIE Downstream Pipeline. The default value is [Auto]. OnBoard LAN This allows you to enable or disable the onboard LAN feature. 40