ASRock 775Dual-915GV User Manual - Page 30
Chipset Configuration, Chipset Configuration
View all ASRock 775Dual-915GV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3.3.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Configuration DRAM Frequency [Auto] Flexibility Option [Disabled] Configure DRAM Timing by SPD [Enabled] DRAM CAS# Latency [Auto] Onboard VGA Selection Aperture Size Select DVMT Mode Select DVMT/FIXED Memory [Auto] [256MB] [DVMT Mode] [Maximum DVMT] OnBoard LAN OnBoard AC'97 Audio OnBoard MC'97 Modem [Enabled] [Auto] [Auto] VCCM VDDQ [Low] [Low] Options Auto 200MHz (DDRII400) 266MHz (DDRII533) +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may also select other value as operating frequency: [166MHz (DDR 333)], [200MHz (DDR 400)]. If DDRII DIMM is inserted to DDRII slot, you may select [200MHz (DDRII 400)], [266MHz (DDRII 533)] as operating frequency. Flexibility Option The default value of this option is [Disabled]. It will allow better tolerance for memory compatibility when it is set to [Enabled]. Configure DRAM Timing by SPD Select [Enabled] will configure the following items by the contents in the SPD (Serial Presence Detect) device. If you select [Disabled], you will find the items "DRAM RAS# Precharge", and "DRAM RAS# Activate to Precharge" appear to allow you adjusting them. DRAM CAS# Latency Use this item to adjust the means of memory accessing. For DDR DIMM: Configuration options are [3], [2.5], [2], and [Auto]. For DDRII DIMM: Configuration options are [5], [4], [3], and [Auto]. DRAM RAS# to CAS# Delay This controls the latency between the DRAM active command and the read / write command. Configuration options: [2 DRAM Clocks], [3 DRAM Clocks], [4 DRAM Clocks], and [5 DRAM Clocks]. DRAM RAS# Precharge This controls the idle clocks after a precharge command is issued. Configuration options: [2 DRAM Clocks], [3 DRAM Clocks], [4 DRAM Clocks], and [5 DRAM Clocks]. 30