ASRock 890GM Pro3 User Manual - Page 51

3.4.4 Storage Configuration BIOS SETUP UTILITY Advanced Storage Configuration Onboard SATA Controller SATA Operation Mode SATA IDE Combined Mode eSATA Mode SATA1 SATA2 SATA3 SATA4 SATA5 eSATA [Enabled] [IDE] [Enabled] [Gen2] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Configure onboard serial ATA controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Onboard SATA Controller Use this item to enable or disable the "Onboard SATA Controller" feature. SATA Operation Mode Use this item to adjust SATA Operation Mode. The default value of this option is [IDE]. Configuration options: [AHCI], [RAID] and [IDE]. If you set this item to RAID mode, it is suggested to install SATA ODD driver on SATA5 port. AMD AHCI BIOS ROM Use this item to enable or disable AMD AHCI BIOS ROM. This option appears only when you set "SATA Operation Mode" to [AHCI]. The default value is [Disabled]. SATA IDE Combined Mode This item is for SATA5 and eSATA ports only. Use this item to enable or disable SATA IDE combined mode. The default value is [Enabled]. If you want to build RAID on SATA5 and eSATA ports, please disable this item. eSATA Mode Use this item to select eSATA mode. Configuration mode: [Auto] and [Gen2]. The default value is [Gen2]. If you use SATA Gen3, please select [Auto]. 51