ASRock 890GX Extreme4 User Manual - Page 63
Storage Configuration, Storage Configuration
View all ASRock 890GX Extreme4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3.4.4 Storage Configuration BIOS SETUP UTILITY Advanced Storage Configuration Onboard SATA Controller SATA Operation Mode SATA IDE Combined Mode SATA3_6 Mode SATA3_1 SATA3_2 SATA3_3 SATA3_4 SATA3_5 SATA3_6 [Enabled] [IDE] [Enabled] [Gen2] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Configure onboard serial ATA controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Onboard SATA Controller Use this item to enable or disable the "Onboard SATA Controller" feature. SATA Operation Mode Use this item to adjust SATA Operation Mode. The default value of this option is [IDE]. Configuration options: [AHCI], [RAID] and [IDE]. If you set this item to RAID mode, it is suggested to install SATA ODD driver on SATA5 port. AMD AHCI BIOS ROM Use this item to enable or disable AMD AHCI BIOS ROM. This option appears only when you set "SATA Operation Mode" to [AHCI]. The default value is [Disabled]. SATA IDE Combined Mode This item is for SATA5 and SATA6/eSATA ports only. Use this item to enable or disable SATA IDE combined mode. The default value is [Enabled]. If you want to build RAID on SATA5 and SATA6/eSATA ports, please disable this item. SATA3_6 Mode Use this item to select SATA6 mode. Configuration mode: [Auto] and [Gen2]. The default value is [Gen2]. If SATA6 port is used internally, not eSATA, please set [Auto] for SATA3 support. 63