ASRock 939NF4G-SATA2 User Manual - Page 27
Cool 'n' Quiet - memory
View all ASRock 939NF4G-SATA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
PCIE Frequency (MHz) Use this option to adjust PCIE frequency. The range is from 70MHz to 150MHz. The default value is [100]. Boot Failure Guard Enable or disable the feature of Boot Failure Guard. CPU Spread Spectrum This feature will be set to [Center Spread] as default. Configuration options: [Disabled], [Center Spread], and [Down Spread]. PCIE Spread Spectrum This feature will be set to [Enabled] as default. Configuration options: [Disabled], and [Enabled]. SATA Spread Spectrum This feature will be set to [Enabled] as default. Configuration options: [Disabled], and [Enabled]. HT Spread Spectrum This feature will be set to [Center Spread] as default. Configuration options: [Disabled], [Center Spread], and [Down Spread]. Cool 'n' Quiet Use this item to enable or disable AMD's Cool 'n' QuietTM technology. Processor Maximum Multiplier It will display Processor Maximum Multiplier for reference. Processor Maximum Voltage It will display Processor Maximum Voltage for reference. Multiplier/Voltage Change This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Multiplier and Processor Voltage. However, it is recommended to keep the default value for system stability. BIOS SETUP UTILITY Advanced CPU Configuration Overclock Mode CPU Frequency (MHz) PCIE Frequency (MHz) Boot Failure Guard CPU Spread Spectrum PCIE Spread Spectrum SATA Spread Spectrum HT Spread Spectrum Cool' n' Quiet Processor Maximum Multiplier Processor Maximum Voltage Multiplier/Voltage Change Processor Multiplier Processor Voltage Memory Clock Flexibility Option Bank Interleaving Burst Length [Auto] [200] [100] [Enabled] [Center Spread] [Enabled] [Enabled] [Center Spread] [Enabled] x11 1.550 V [Manual] [x8] [1.500V] [Auto] [Disabled] [Auto] [4 Beats] If AUTO, multiplier and voltage will be left at the rated frequency/voltage. If Manual, multiplier and voltage will be set based on User Selection in Setup. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Processor Multiplier This item will show when "Multiplier/Voltage Change" is set to [Manual]; otherwise, it will be hidden. You may set the value from [x8] up to [x25] but no higher than the value of "Processor Maximum Multiplier". For example, if 27