ASRock 960GC-GS FX User Manual - Page 34
OC Tweaker Screen - 6300
View all ASRock 960GC-GS FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3.3 OC Tweaker Screen In the OC Tweaker screen, you can set up overclocking features. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit CPU Configuration Overclock Mode CPU Frequency (MHz) PCIE Frequency (MHz) Spread Spectrum Boot Failure Guard Boot Failure Guard Count Advanced Clock Calibration Processor Maximum Frequency North Bridge Maximum Frequency Processor Maximum Voltage Multiplier/Voltage Change HT Bus Speed HT Bus Width Memory Configuration Memory Clock [Auto] [400] [100] [Auto] [Enabled] [3] [Disabled] x31.5 6300 MHZ x31.0 6200 MHz 1.5500 V [Auto] [Auto] [Auto] [Auto] Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. CPU Configuration Overclock Mode Use this to select Overclock Mode. The default value is [Auto]. Configuration options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized]. CPU Frequency (MHz) Use this option to adjust CPU frequency. PCIE Frequency (MHz) Use this option to adjust PCIE frequency. Spread Spectrum This feature will be set to [Enabled] as default. Configuration options: [Disabled] and [Enabled]. Boot Failure Guard Enable or disable the feature of Boot Failure Guard. Boot Failure Guard Count Enable or disable the feature of Boot Failure Guard Count. Advanced Clock Calibration This allows you to adjust Advanced Clock Calibration feature. The default valueis [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and [PerCore]. If you select [All Cores], you will see the option "Value (All Cores)".Configuration options: [+12%] to [-12%]. If you select [Per Core], you will seethe options "Value (Core 0)", "Value (Core 1)", "Value (Core 2)" and "Value(Core 3)". Configuration options: [+12%] to [-12%]. Processor Maximum Frequency It will display Processor Maximum Frequency for reference. 34