ASRock 960GM/U3S3 FX Quick Installation Guide - Page 22
Chassis and Power Fan Connectors - fan control
View all ASRock 960GM/U3S3 FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio panel, please install it to the front panel audio header as below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel. E. To activate the front mic. For Windows® XP / XP 64-bit OS: Select "Mixer". Select "Recorder". Then click "FrontMic". For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS: Go to the "FrontMic" Tab in the Realtek Control panel. Adjust "Recording Volume". System Panel Header (9-pin PANEL1) (see p.2 No. 17) This header accommodates several system front panel functions. Chassis Speaker Header (4-pin SPEAKER 1) (see p.2 No. 16) Chassis and Power Fan Connectors (4-pin CHA_FAN1) (see p.2 No. 18) (3-pin PWR_FAN1) (see p.2 No. 7) CPU Fan Connector 1 (4-pin CPU_FAN1) 2 3 (see p.2 No. 5) 4 Please connect the chassis speaker to this header. Please connect the fan cables to the fan connectors and match the black wire to the Please connect the CPU fan cable to this connector and match the black wire to the ground pin. English 22 ASRock 960GM/U3S3 FX Motherboard