ASRock 960GM-GS3 FX User Manual - Page 39

Memory Timing BIOS SETUP UTILITY OC Tweaker Memory Timing Power Down Enable Bank Interleaving Channel Interleaving CAS Latency (CL) TRCD TRP TRAS Command Rate TRC TRTP TWR TRFC TRRD TWTR TRTP TFAW [Disabled] [Auto] [Hash 2] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Power Down Enable Use this item to enable or disable DDR power down mode. Bank Interleaving Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention. Channel Interleaving It allows you to enable Channel Memory Interleaving. Configuration options: [Disabled], [Address bits 6], [Address bits 12], [HASH 1] and [HASH 2]. The default value is [HASH 2]. CAS Latency (CL) Use this item to adjust the means of memory accessing. The default value is [Auto]. TRCD Use this to adjust TRCD values. The default value is [Auto]. TRP Use this to adjust TRP values. The default value is [Auto]. TRAS Use this to adjust TRAS values. The default value is [Auto]. Command Rate Use this item to change Command Rate Auto/Manual setting. Min: 1N. Max: 2N. The default is [Auto]. TRC Use this to adjust TRC values. The default value is [Auto]. TRTP Use this to adjust TRTP values. The default value is [Auto]. TWR Use this to adjust TWR values. The default value is [Auto]. TRFC Use this to adjust TRFC values. The default value is [Auto]. 39