ASRock A75M-DGS User Manual - Page 26
Onboard Headers and Connectors
View all ASRock A75M-DGS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2.9 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial ATA3 Connectors (SATA_1: see p.12, No. 12) (SATA_2: see p.12, No. 13) (SATA_3: see p.12, No. 11) (SATA_4: see p.12, No. 10) SATA_3 SATA_1 SATA_2 SATA_4 These four Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate. Serial ATA (SATA) Data Cable (Optional) Either end of the SATA data cable can be connected to the SATA3 hard disk or the SATA3 connector on this motherboard. Print Port Header (25-pin LPT1) (see p.12 No. 17) AFD# ERROR# PINIT# SLIN# GND 1 SPD7 SPD6 ACK# SPD5 BUSY SPD4 PE SPD3 SLCT SPD2 SPD1 SPD0 STB# This is an interface for print port cable that allows convenient connection of printer devices. USB 2.0 Headers (9-pin USB6_7) (see p.12 No. 18) (9-pin USB8_9) (see p.12 No. 20) USB_PWR P-9 P+9 GND DUMMY 1 GND P+8 P-8 USB_PWR Besides two default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. 26