ASRock AD2700B-ITX User Manual - Page 16
Installation of Memory Modules SO-DIMM, Installing a SO-DIMM - itx motherboard
View all ASRock AD2700B-ITX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2.3 Installation of Memory Modules (SO-DIMM) AD2700B-ITX / AD2500B-ITX motherboard provides two 240-pin DDR3 (Double Data Rate 3) SO-DIMM slots. 1. It is not allowed to install a DDR or DDR2 memory module into DDR3 slot; otherwise, this motherboard and SO-DIMM may be damaged. 2. Please install the memory module from DDR3_A2 slot for the first priority. Installing a SO-DIMM Please make sure to disconnect power supply before adding or removing SO-DIMMs or the system components. Step 1. Step 2. Unlock a SO-DIMM slot by pressing the retaining clips outward. Align a SO-DIMM on the slot such that the notch on the SO-DIMM matches the break on the slot. notch break notch break The SO-DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the SO-DIMM if you force the SODIMM into the slot at incorrect orientation. Step 3. Firmly insert the SO-DIMM into the slot until the retaining clips at both ends fully snap back in place and the SO-DIMM is properly seated. 16