ASRock H110 Pro BTC Quick Installation Guide - Page 27
Step 3, Step 4, Step 5
View all ASRock H110 Pro BTC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
D C B A D C B A C B A H110 Pro BTC+ Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location A by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. Step 4 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only fits in one orientation. C B A English 25
25
English
H110 Pro BTC+
Step 3
Move the stando´ based on the
module type and length.
Te stando´ is placed at the nut
location A by default. Skip Step 3
and 4 and go straight to Step
5
if you
are going to use the default nut.
Otherwise, release the stando´ by
hand.
B
C
D
A
Step 4
Peel o´ the yellow protective Flm on
the nut to be used. Hand tighten the
stando´ into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NG²²) SSD module into the M.2
slot. Please be aware that the M.2
(NG²²) SSD module only Fts in one
orientation.
B
C
A
A
B
C
B
C
D
A