ASRock K8Upgrade-NF3 User Manual - Page 28

TRAS Use this to adjust TRAS values. Configuration options: [Auto], [5CLK], [6CLK], [7CLK], [8CLK], [9CLK], [10CLK], [11CLK], [12CLK], [13CLK], [14CLK], and [15CLK]. The default value is [Auto]. TRP Use this to adjust TRP values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK], [5CLK], and [6CLK]. The default value is [Auto]. MA Timing Use this to adjust values for MA timing. Configuration options: [Auto], [2T], [1T]. The default value is [Auto]. 3.3.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings OnBoard AC97 Audio OnBoard LAN [Auto] [Enabled] AGP Data Rate AGP Aperture Size AGP Fast Write AGP SideBand Address Primary Graphics Adapter [4X] [64MB] [Disabled] [Enabled] [PCI] HT Width HT Speed DRAM Voltage AGP Voltage [Auto] [Auto] [Auto] [Auto] Enable/Disable onboard Audio device. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. OnBoard AC97 Audio Select [Auto] or [Disabled] for the onboard AC97 Audio feature. OnBoard LAN This allows you to enable or disable the onboard LAN feature. AGP Data Rate Use this item to adjust the AGP Data Rate. Configuration options: [4X], [2X], [1X]. AGP Aperture Size It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card's specifications requires other sizes. Configuration options: [32MB], [64MB], [128MB], [256MB], and [512MB]. AGP Fast Write This allows you to enable or disable the feature of AGP fast write protocol support. AGP SideBand Address This allows you to enable or disable the feature of AGP SideBand Address. Configuration options: [Enabled], and [Disabled]. 28