ASRock M3A790GXH/USB3 User Manual - Page 19
Installing an expansion card
View all ASRock M3A790GXH/USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PCIE2 / PCIE3 / SLI/XFire Switch Card Retention Slot Configurations PCIE2 Slot PCIE3 Slot SLI/XFire Switch Card (Blue) (Blue) Retention Slot Single Graphics Card PCIE x16 N/A (Default) Dual Graphics Cards in CrossFireXTM Mode PCIE x8 PCIE x8 Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover. 19