ASRock N68-GS RAID Installation Guide - Page 12

B. Creating RAID Arrays This section includes examples of using NVRAIDMAN for creating RAID arrays. If your motherboard is equipped with four SATA / SATAII ports, you may choose to use RAID 0, RAID 1, RAID 0+1, JBOD, or RAID 5 function with your motherboard according to the SATA / SATAII HDDs amount you install. Please refer to the RAID functions your motherboard provides in advance and follow the instruction in this section to create RAID arrays. The RAID items which may be mentioned in this section are as below: - RAID 0: Striping - RAID 1: Mirroring - RAID 0+1: Stripe Mirroring - JBOD: Spanning - RAID 5 In this section, we take RAID 0 for example to show you how to use NVRAIDMAN to create RAID 0 (Striping). If you plan to use NVRAIDMAN to create other RAID arrays, the operation procedures are similar to the steps of creating RAID 0. Please do the following: A. Go to the system BIOS and make sure that the drives that you want to use are RAID enabled. B. Boot to Windows and launch the NVRAIDMAN application. C. Create Array and the following screen will appear. 12