ASRock N68-VS3 FX RAID Installation Guide - Page 12
B. Creating RAID Arrays
View all ASRock N68-VS3 FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
B. Creating RAID Arrays This section includes examples of using NVRAIDMAN for creating RAID arrays. If your motherboard is equipped with two SATA / SATAII ports, you may choose to use RAID 0, RAID 1, or JBOD function with your motherboard. If your motherboard is equipped with four SATA / SATAII ports, you may choose to use RAID 0, RAID 1, RAID 0+1, JBOD, or RAID 5 function with your motherboard according to the SATA / SATAII HDDs amount you install. Please refer to the RAID functions your motherboard provides in advance and follow the instruction in this section to create RAID arrays. The RAID items which may be mentioned in this section are as below: - RAID 0: Striping - RAID 1: Mirroring - RAID 0+1: Stripe Mirroring - JBOD: Spanning - RAID 5 NOTE: Under Windows XP OS, the connector naming on our motherboard is different from NVIDIA utility naming. Please refer to below table for detailed information. SATAII_1 (port 1.0) --> Means controller 1's first port SATAII_2 (port 1.1) --> Means controller 1's second port SATAII_3 (port 2.0) --> Means controller 2's first port SATAII_4 (port 2.1) --> Means controller 2's second port In this section, we take RAID 0 for example to show you how to use NVRAIDMAN to create RAID 0 (Striping). If you plan to use NVRAIDMAN to create other RAID arrays, 12