ASRock P43 Pro/USB3 User Manual - Page 33

3.3 OC Tweaker Screen In the OC Tweaker screen, you can set up overclocking features. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit OC Tweaker Settings Load CPU EZ OC Setting [Press Enter] DRAM Frequency DRAM Command Rate DRAM Timing Configuration [Auto] [Auto] Ratio Status Unlocked (Min:06, Max:Unlimited) Ratio CMOS Setting 8 [8] Intel (R) SpeedStep (tm) tech. [Auto] Overclock Mode [Auto] CPU Frequency (MHz) [400] PCIE Frequency (MHz) [100] Strap FSB to MCH [Auto] Voltage Configuration ASRock VDroop Control [With VDroop] Would you like to save current setting as Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Load CPU EZ OC Setting You can use this option to load CPU EZ overclocking setting. Please note that overclocing may cause damage to your CPU and motherboard. It should be done at your own risk and expense. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may select [Auto], [400MHz_DDR3 800], [533MHz_DDR3 1066], [667MHz_DDR3 1333] or [800MHz_DDR3 1600]. DRAM Command Rate Use this item to adjust DRAM Command Rate. Configuration options : [1N], [2N] and [Auto]. DRAM Timing Configuation BIOS SETUP UTILITY OC Tweaker Standard Memory Settings DRAM tCL DRAM tRCD DRAM tRP DRAM tRAS DRAM tRFC DRAM tWR DRAM tWTR DRAM tRRD DRAM tRTP 8 [Auto] 8 [Auto] 8 [Auto] 20 [Auto] 48 [Auto] 8 [Auto] 4 [Auto] 6 [Auto] 6 [Auto] DRAM tCL Value DDR3 Min = 5 DDR3 Max = 10 +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. 33