ASRock P4i45PE User Manual - Page 25
Auto], [67.2MHz, 33.6MHz], [72.0MHz, 36.0MHz], [64.0MHz, 32.0MHz]
View all ASRock P4i45PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chipset Configuration Advanced AMIBIOS SETUP UTILITY - VERSION 3.31a Chipset Configuration [ Setup Help ] AGP Aperture Size ICH Delayed Transaction USB Controller USB Device Legacy Support 64MB Disabled Enabled Disabled to select the size of mapped memory for graphics data. CPU Thermal Throttling DRAM Write Throttling Enabled Enabled AGP / PCI Frequency Auto ******** DRAM Timing ******** SDRAM CAS Latency Configure SDRAM Timing by SPD SDRAM RAS# Precharge SDRAM RAS# to CAS# Delay SDRAM Precharge Delay Auto Disabled 3 Clocks 3 Clocks 7 Clocks F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit AGP Aperture Size It refers to a section of the PCI memory address range used for graphics m emory. We recommend that you leave this field at the default value unless your AGP card requires other sizes. ICH Delayed Transaction Select [Enabled] will enable delayed transactions for internal register, FWH, and LPC interface accesses. USB Controller Use this to enable or disable the use of USB controller. USB Device Legacy Support Use this to enable or disable support to emulate legacy I/O devices such as mouse, keyboard,... etc. CPU Thermal Throttling Select [Enabled] will enable P4 thermal control circuit to keep CPU from overheated. DRAM Write Throttling Select [Enabled] will reduce the temperature of North Bridge and DRAM. However, it will decrease the memory writing throughput. AGP/PCI Frequency The defaul value is [Auto], or you may select among other four sets of configuration options as the AGP/PCI frequency. Configuration options: [Auto], [67.2MHz, 33.6MHz], [72.0MHz, 36.0MHz], [64.0MHz, 32.0MHz], [76.0MHz, 38.4MHz]. SDRAM CAS Latency This parameter controls the latency between the read command and the time the data available. 25