ASRock P4i45PE User Manual - Page 26

OnBoard FDC: You may select [Auto], [Disabled], or [Enabled] for the on-board floppy drive controller. OnBoard Serial Port: Use this to set addresses for the on-board serial ports or disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 / COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4]. OnBoard Infrared Port: You may select [Auto] for the on-board infrared port feature, which will enable this feature if the infrared module is installed. Or you may disable the feature by selecting [Disabled] OnBoard Parallel Port: Use this option to select Parallel Port address or disable the on-board Parallel Port. Configuration options: [Auto], [Disabled], [378], [278]. Parallel Port Mode: Set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, "EPP Version". OnBoard Midi Port: Select address for the on-board Midi Port or disable it. Configuration options: [Disabled], [330], [300], [310], [320]. Midi IRQ Select: Use this to select Midi IRQ. Configuration options: [3], [4], [5], [7], [10], [11]. OnBoard Game Port: Select address for the on-board Game Port or disable it. Configuration options: [200H], [208H], [Disabled]. OnBoard IDE: You may enable either the primary IDE channel or the secondary IDE channel. Or you may enable both the primary and the secondary IDE channels by selecting [Both]. Set to [Disabled] will disable the both. Configuration options: [Disabled], [Primary], [Secondary], [Both]. OnBoard LAN: This allows you to enable or disable the on-board LAN feature. OnBoard AC'97 Audio: Select [Enabled], [Auto] or [Disabled] for the on-board AC'97 Audio feature. OnBoard MC'97 Modem: You may select [Auto] or [Disabled] for the on-board MC'97 modem feature. 26