ASRock X299M Extreme4 Quick Installation Guide - Page 25
pin CHA_²AN1/WP - manual
View all ASRock X299M Extreme4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
X299M Extreme4 Front Panel Audio Headers (9-pin HD_AUDIO1) (see p.1, No. 28) (9-pin HD_AUDIO_RA1) (see p.1, No. 27) GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L This header is for connecting audio devices to the front audio panel. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Optional/Water This motherboard Pump Fan Connectors FAN_SPEED FAN_VOLTAGE_CONTROL provides three 4-Pin water (4-pin CHA_FAN1/WP) GND FAN_SPEED_CONTROL cooling chassis fan (see p.1, No. 8) connector. If you plan to connect a 3-Pin chassis (4-pin CHA_FAN2/WP) 4 3 2 1 water cooler fan, please (see p.1, No. 22) connect it to Pin 1-3. (4-pin CHA_FAN3/WP) (see p.1, No. 18) FAN_SPEED_CONTROL CHA_FAN_SPEED FAN_VOLTAGE GND CPU Fan Connector (4-pin CPU_FAN1) (see p.1, No. 5) FAN_SPEED This motherboard FAN_VOLTAGE_CONTROL GND FAN_SPEED_CONTROL provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. 23 English