ASRock X48TurboTwins-WiFi Quick Installation Guide - Page 25
the orange SATAII connector SATAII_6 Port5; see p.2 No.20 and one of
View all ASRock X48TurboTwins-WiFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connect the SATA data cable to one of the orange SATAII connector (SATAII_6 (Port5)) Connect the SATA data cable to one of the orange eSATAII connector (eSATAII_BOTTOM) 2. If you plan to install two eSATAII devices to this motherboard, you need to enable both the top and the bottom eSATAII ports of the I/O shield. In order to enable the top and the bottom eSATAII ports of the I/O shield, you have to connect one of the orange SATAII connector (SATAII_6 (Port5); see p.2 No.20) and one of the orange eSATAII connector (eSATAII_BOTTOM; see p.2 No.3) with a SATA data cable first, and then connect the other orange SATAII connector (SATAII_5 (Port4); see p.2 No.23) and the other orange eSATAII connector (eSATAII_TOP; see p.2 No.39) with the other SATA data cable. After that, both the top and the bottom eSATAII ports of the I/O shield are enabled. English Connect the SATA data cables to both orange SATAII connectors (SATAII_6 (Port5) and SATAII_5 (Port4)) Connect the SATA data cables to both orange eSATAII connectors (eSATAII_BOTTOM and eSATAII_TOP) 3. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of the I/O shield. Connect one end of the eSATAII device cable to eSATAII device Connect the other end of the eSATAII device cable to eSATAII port of the I/O shield 25 ASRock X48TurboTwins-WiFi Motherboard