ASRock X58 SuperComputer User Manual
ASRock X58 SuperComputer Manual
 |
View all ASRock X58 SuperComputer manuals
Add to My Manuals
Save this manual to your list of manuals |
ASRock X58 SuperComputer manual content summary:
- ASRock X58 SuperComputer | User Manual - Page 1
X58 SuperComputer User Manual Version 1.2 Published April 2009 Copyright©2009 ASRock INC. All rights reserved. 1 - ASRock X58 SuperComputer | User Manual - Page 2
purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate - ASRock X58 SuperComputer | User Manual - Page 3
2.17 Driver Installation Guide 45 2.18 Installing Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit With RAID Functions 45 2.18.1 Installing Windows® XP / XP 64-bit With RAID Functions 45 2.18.2 Setting Up a "RAID Ready" System 46 2.18.3 Migrating a "RAID Ready" System to RAID 0, RAID 1 or RAID - ASRock X58 SuperComputer | User Manual - Page 4
Without RAID Functions 50 2.20 DTS Operation Guide 51 2.21 Untied Overclocking Technology 53 3 BIOS SETUP UTILITY 53 3.1 Introduction 53 3.1.1 BIOS Menu 73 4 Software Support 74 4.1 Install Operating System 74 4.2 Support CD Information 74 4.2.1 Running Support CD 74 4.2.2 Drivers Menu 74 - ASRock X58 SuperComputer | User Manual - Page 5
guide to BIOS setup and information of the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock - ASRock X58 SuperComputer | User Manual - Page 6
CoreTM i7 Processor Supports Intel® Dynamic Speed Technology - System Bus up to 6400 MT/s; Intel® QuickPath Interconnect - Supports Hyper-Threading Technology (see CAUTION 1) - Supports Untied Overclocking Technology (see CAUTION 2) - Supports EM64T CPU - Northbridge: Intel® X58 - Southbridge: Intel - ASRock X58 SuperComputer | User Manual - Page 7
CAUTION 6) - 6 x SATAII 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel Matrix Storage), NCQ, AHCI and "Hot Plug" - Supports I. O. T. (Intelligent Overclocking Technology) - Supports Smart BIOS - Drivers, Utilities, AntiVirus Software (Trial Version) - ASRock OC - ASRock X58 SuperComputer | User Manual - Page 8
need to adjust the settings after audio driver installation. Please refer to "DTS Operation Guide" on page 51 for details. 6. For microphone input, this motherboard supports both stereo and mono modes. For audio output, this motherboard supports 2-channel, 4channel, 6-channel, and 8-channel modes - ASRock X58 SuperComputer | User Manual - Page 9
9. It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices to get the resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back - ASRock X58 SuperComputer | User Manual - Page 10
http://www.asrock.com/support/index.htm 1.4 Three SLITM Graphics Card Support List (for Windows® VistaTM / VistaTM 64-bit) Chipset Vendor NVIDIA Model Name LEADTEK PX9800 GTX+ GIGABYTE GV-N26-896H-B Chipset Name Driver GeForce 9800GTX+ 180.48 GeForce GTX260 180.48 * For the latest updates of - ASRock X58 SuperComputer | User Manual - Page 11
GC-HD485PG3-E3 Chipset Name RADEON 4850 Driver Catalyst 8.12 + Hotfix * For the latest updates of the supported PCI Express VGA card list for CrossFireXTM Mode, please visit our website for details. ASRock website: http://www.asrock.com/support/index.htm 1.7 Four CrossFireXTM Graphics Card - ASRock X58 SuperComputer | User Manual - Page 12
1.8 Motherboard Layout 1 2 24.4cm (9.6 in) 3 4 PS2 Mouse PS2 Keyboard 1 PS2_USB_PWR1 5 PCI Express 2.0 PCI2 1394a X58 SuperComputer 8Mb BIOS PCIE3 PCI3 CMOS Battery FLOPPY1 HDMI_SPDIF1 1 PCIE4 1 COM1 1 IR1 CLRCMOS1 1 VIA VT6330 IDE1 Intel ICH10R RAID USB10 1 SPEAKER1 1 28 - ASRock X58 SuperComputer | User Manual - Page 13
1 . 9 I/O Panel 12 34 5 69 7 10 8 11 17 16 15 14 13 12 1 PS/2 Mouse Port (Green) 2 Coaxial SPDIF Out Port * 3 LAN RJ-45 Port 4 IEEE 1394 Port * 5 LAN RJ-45 Port 6 Side Speaker (Gray) 7 Rear Speaker (Black) 8 Central / Bass (Orange) 9 Line In (Light Blue) ** 10 11 12 13 14 15 16 17 Front - ASRock X58 SuperComputer | User Manual - Page 14
settings. 1. Unplug the power cord from the wall socket before touching any component. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded - ASRock X58 SuperComputer | User Manual - Page 15
2.3 CPU Installation For the installation of Intel 1366-Pin CPU, please follow the steps below. Load Plate Contact Array Socket Body Load Lever 1366-Pin Socket use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. 15 - ASRock X58 SuperComputer | User Manual - Page 16
black line black line Step 3. Insert the 1366-Pin CPU: Step 3-1. Hold the CPU by the edges where are marked with black lines. Step 3-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. orientation key notch Pin1 Pin1 alignment key orientation - ASRock X58 SuperComputer | User Manual - Page 17
motherboard is equipped with 1366-Pin socket that supports Intel 1366-Pin CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 12, No. 35). For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate - ASRock X58 SuperComputer | User Manual - Page 18
10), so that Triple Channel Memory Technology can be activated. This motherboard also allows you to install six DDR3 DIMMs for triple channel DDR3_A2, DDR3_B2 or DDR3_C2 slot. 3. Due to Intel® CPU spec definition, XMP DIMMs and DDR3 2000/ 1866/1600 are supported for one DIMM per channel only. 4. You - ASRock X58 SuperComputer | User Manual - Page 19
matches the break on the slot. notch break notch break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining - ASRock X58 SuperComputer | User Manual - Page 20
2.6 Expansion Slots (PCI and PCI Express Slots) There are 3 PCI slots and 4 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 / PCIE3 (PCIE x16 slot; Blue) - ASRock X58 SuperComputer | User Manual - Page 21
the expansion card and make necessary hardware settings for the card before you start the installation. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Step - ASRock X58 SuperComputer | User Manual - Page 22
Guide This motherboard supports NVIDIA® SLITM, 3-Way SLITM and Quad SLITM (Scalable Link Interface) technology that allows you to install up to three identical PCI Express x16 graphics cards. Currently, NVIDIA® SLITM technology supports driver supports NVIDIA® SLITM technology. Download the driver - ASRock X58 SuperComputer | User Manual - Page 23
Step3. Align and insertASRock SLI_Bridge_3S Card to the goldfingers on each graphics card. Make sure ASRock SLI_Bridge_3S Card is firmly in place. ASRock SLI_Bridge_3S Card Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted - ASRock X58 SuperComputer | User Manual - Page 24
card are connected. Repeat this step on the three graphics cards. Step3. Align and insert ASRock 3-Way SLI Bridge Card to the goldfingers on each graphics card. Make sure ASRock 3-Way SLI Bridge Card is firmly in place. ASRock 3-Way SLI Bridge Card Step4. Connect a VGA cable or a DVI cable to the - ASRock X58 SuperComputer | User Manual - Page 25
Installation and Setup Install the graphics card drivers to your system. After that, you can enable the MultiGraphics Processing Unit (GPU) feature in the NVIDIA® nView system tray utility. Please follow the below - ASRock X58 SuperComputer | User Manual - Page 26
For Windows® VistaTM / VistaTM 64-bit OS: (For SLITM and Quad SLITM mode) A. Click the Start icon on your Windows taskbar. B. From the pop-up menu, select All Programs, and then click NVIDIA Corporation. C. Select NVIDIA Control Panel tab. D. Select Control Panel tab. E. From the pop-up menu, select - ASRock X58 SuperComputer | User Manual - Page 27
For Windows® VistaTM / VistaTM 64-bit OS: (For 3-Way SLITM mode) A. Follow step A to D on page 26. B. From the pop-up menu, select Set SLI and PhysX configuration. In Select a hardware acceleration setting for PhysX item, please select Enabled. In Select an SLI configuration item, please select - ASRock X58 SuperComputer | User Manual - Page 28
Guide This motherboard supports supported with Windows® XP with Service Pack 2 and VistaTM OS. Quad CrossFireXTM feature is supported with Windows® VistaTM OS only. Please check AMD website for ATITM CrossFireXTM driver updates ATITM graphics card manuals for detailed installation guide. Step 1. - ASRock X58 SuperComputer | User Manual - Page 29
top of Radeon graphics cards. (If there are two gold fingers on each Radeon graphics card, please use two ASRock XFire_Bridge_3S Cards to connect two Radeon graphics cards.) ASRock XFire_Bridge_3S Card Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics card on PCIE1 - ASRock X58 SuperComputer | User Manual - Page 30
Radeon graphics cards on PCIE2 and PCIE3 slots. (CrossFireXTM Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.) CrossFireXTM Bridge Step 3. Connect the DVI monitor cable to the DVI connector on - ASRock X58 SuperComputer | User Manual - Page 31
utility to uninstall any previously installed Catalyst drivers prior to installation. Please check AMD website for ATITM driver updates. Step 3. Step 4. Step 5. Install the required drivers to your system. For Windows® XP OS: A. ATITM recommends Windows® XP Service Pack 2 or higher to be installed - ASRock X58 SuperComputer | User Manual - Page 32
for identification or explanation and to the owners' benefit, without intent to infringe. * For further information of ATITM CrossFireXTM technology, please check AMD website for updates and details. 32 - ASRock X58 SuperComputer | User Manual - Page 33
Display Feature This motherboard supports Surround Display upgrade. With the external add-on PCI Express VGA cards, you can easily enjoy the benefits of Surround Display feature. For the detailed instruction, please refer to the document at the following path in the Support CD: ..\ Surround Display - ASRock X58 SuperComputer | User Manual - Page 34
end to the motherboard connect the black end to the IDE devices 80-conductor ATA 66/100/133 cable Note: Please refer to the instruction of your IDE Gb/s data transfer rate. SATAII_5_6 connectors can also be used to support eSATAII devices. Serial ATA (SATA) Data Cable (Optional) Either end - ASRock X58 SuperComputer | User Manual - Page 35
on the I/O panel, there are three USB 2.0 headers on this motherboard. USB8_9 and USB6_7 headers can support four USB 2.0 ports (two ports for each header). USB10 header can support one USB 2.0 port. This header supports an optional wireless transmitting and receiving infrared module. This connector - ASRock X58 SuperComputer | User Manual - Page 36
wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. 't need to connect them for AC'97 audio panel. E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select Chipset Configuration. Set - ASRock X58 SuperComputer | User Manual - Page 37
3 +12V 2 GND 1 Please connect a CPU fan cable to this connector and match the black wire to the ground pin. Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the - ASRock X58 SuperComputer | User Manual - Page 38
one default IEEE 1394 port on the I/O panel, there is one IEEE 1394 header (FRONT_1394) on this motherboard. This IEEE 1394 header can support one IEEE 1394 port. This COM1 header supports a serial port module. HDMI_SPDIF header, providing SPDIF audio output to HDMI VGA card, allows the system to - ASRock X58 SuperComputer | User Manual - Page 39
motherboard with a HDMI_SPDIF header. This motherboard motherboard. For the proper installation of HDMI VGA card, please refer to the installation guide manual of HDMI VGA card vendor. Incorrect connection may cause permanent damage to this motherboard Otherwise, the motherboard and the user manual for - ASRock X58 SuperComputer | User Manual - Page 40
guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction 's website for details: http://www.hitachigst.com/hdd/support/download.htm The above examples are just for your - ASRock X58 SuperComputer | User Manual - Page 41
south bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5, and Intel Matrix Storage) functions. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to install - ASRock X58 SuperComputer | User Manual - Page 42
Swap Functions for SATA / SATAII HDDs and eSATAII Devices This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII / eSATAII Devices in RAID / AHCI mode. Intel® ICH10R south bridge chipset provides hardware support for Advanced Host controller Interface (AHCI), a new programming - ASRock X58 SuperComputer | User Manual - Page 43
is installed into system properly. The latest SATA / SATAII driver is available on our support website: www.asrock.com 4. Make sure to use the SATA power cable & data cable, which are from our motherboard package. 5. Please follow below instructions step by step to reduce the risk of HDD crash or - ASRock X58 SuperComputer | User Manual - Page 44
cable to (White) to the power supply 1x4-pin cable. the motherboard's SATAII connector. SATA power cable 1x4-pin power connector (White) Step attention, before you process the Hot Unplug: Please do follow below instruction sequence to process the Hot Unplug, improper procedure will cause the SATA - ASRock X58 SuperComputer | User Manual - Page 45
with RAID functions, please follow below steps. STEP 1: Set up BIOS. A. Enter BIOS SETUP UTILITY drivers into the floppy diskette. STEP 3: Use "RAID Installation Guide" to set RAID configuration. Before you start to configure the RAID function, you need to check the installation guide in the Support - ASRock X58 SuperComputer | User Manual - Page 46
. Please refer to the document in the Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration", which is located in the folder at the following path: .. \ RAID Installation Guide and the document in the support CD, "Guide to Intel Matrix Storage Manager", which is located in - ASRock X58 SuperComputer | User Manual - Page 47
Storage Manager software via the CD-ROM included with your motherboard or after downloading it from the Internet. This will add the Intel(R) Matrix Storage Console which can be used to manage the RAID configuration. 7. After setting up a "RAID Ready" system as the above steps, you can follow the - ASRock X58 SuperComputer | User Manual - Page 48
the instruction to install Windows® VistaTM / VistaTM 64-bit OS on your system. When you see "Where do you want to install Windows?" page, please insert the ASRock Support CD into your optical drive, and click the "Load Driver" button on the left on the bottom to load the Intel® RAID drivers. Intel - ASRock X58 SuperComputer | User Manual - Page 49
beginning of Windows® setup, press F6 to install a thirdparty AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing the Intel® AHCI driver. After reading the floppy disk, the driver will be presented. Select the driver to install according to the mode you choose and the OS - ASRock X58 SuperComputer | User Manual - Page 50
the instruction to install Windows® VistaTM / VistaTM 64-bit OS on your system. When you see "Where do you want to install Windows?" page, please insert the ASRock Support CD into your optical drive, and click the "Load Driver" button on the left on the bottom to load the Intel® AHCI drivers. Intel - ASRock X58 SuperComputer | User Manual - Page 51
2.20 DTS Operation Guide DTS (Digital Theater Systems) is a multi-channel digital surround dramatically improves content. Please follow below steps to enable DTS function: 1. Install the drivers to your system from ASRock support CD. 2. Reboot your system. 3. You will find the icon (Realtek HD - ASRock X58 SuperComputer | User Manual - Page 52
Music Mode Cinema Mode Music Mode The music mode is for use with any stereo music recordings, which preserves the integrity of the stereo mix while augmenting it with a center channel to anchor the image, and deriving enough surround content to yield a spacious, three-dimensional listening - ASRock X58 SuperComputer | User Manual - Page 53
Technology This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup to set the selection from [Auto] to [Manual - ASRock X58 SuperComputer | User Manual - Page 54
System Time System Date [14:00:09] [Wed 12/24/2008] BIOS Version : X58 SuperComputer P1.00 Processor Type : Intel (R) Xeon (TM) CPU W 570 @ 3.20GHz (64bit) Processor Speed : 3200MHz Microcode Update : 106A4/A Cache Size : 8192KB Total Memory DDR3_A2 DDR3_A1 DDR3_B2 DDR3_B1 DDR3_C2 - ASRock X58 SuperComputer | User Manual - Page 55
Main Smart Advanced H/W Monitor Boot Security Exit Smart Settings Save Changes and Exit Load BIOS Defaults Load Performance Setup Default (IDE/SATA) Load Performance Setup AHCI Mode Load Performance Setup RAID Mode Load Power Saving Setup Default Load OC '4.0GMHz CPU Frequency' Setup Setting Load - ASRock X58 SuperComputer | User Manual - Page 56
CPU Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Advanced Settings WARNING : Setting wrong values in below - ASRock X58 SuperComputer | User Manual - Page 57
Threading Technology Active Processor Cores A20M Intel (R) SpeedStep(tm) tech Intel (R) TurboMode tech [Auto motherboard. Enhance Halt State All processors support the Halt State (C1). The C1 state is supported through the native processor instructions HLT and MWAIT and requires no hardware support - ASRock X58 SuperComputer | User Manual - Page 58
a computer system with an Intel CoreTM i7 processor that supports Hyper-Threading technology and an Linux kernel version 2.4.18 or higher. This option will be hidden if the installed CPU does not support Hyper-Threading technology. Active Processor Cores Use this item to select the number of cores - ASRock X58 SuperComputer | User Manual - Page 59
limit for Turbo Mode so that the processor does not throttle at peak performance conditions. Intel (R) C-STATE tech. Intel (R) C-STATE tech. is achieved by making the power and thermal control unit part of the core logic and not part of the chipset as before. Migration of the power and thermal - ASRock X58 SuperComputer | User Manual - Page 60
3.4.2Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings Overclock Mode BCLK Frequency (MHz) Overclock Mode Use this to select Overclock Mode. Configuration options: [Auto], [Manual], [I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual], Untied Overclocking - ASRock X58 SuperComputer | User Manual - Page 61
DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate set to [Enabled]. DRAM Timing Control Use this item to control DRAM Timing. BIOS SETUP UTILITY Advanced DRAM Timing Control Current Setting : 8-8-8-20-48-8-4-6-5-21 DRAM tCL - ASRock X58 SuperComputer | User Manual - Page 62
is [Auto]. Voltage Control Use this item to control voltage. BIOS SETUP UTILITY Advanced Voltage Control CPU Voltage DRAM Voltage DRAM CTRL Voltage Use this to select CPU Voltage. Configuration options: [Auto] and [Manual]. The default value is [Auto]. DRAM Voltage Use this to select DRAM Voltage - ASRock X58 SuperComputer | User Manual - Page 63
value is [Disabled]. Configuration options: [Enabled] and [Disabled]. If you want to enable this function, please set this item to [Enabled]. Besides the BIOS option, you can also choose our Intelligent Energy Saver utility to enable this function. CIR10 Field 1 Use this to enable or disable CIR10 - ASRock X58 SuperComputer | User Manual - Page 64
This determines the maximum TLP (Transaction Layer Packet) payload size that can be supported by PCI Express controller. Configuration options: [128B] and [256B]. The default value is [128B]. 3.4.3ACPI Configuration BIOS SETUP UTILITY Advanced ACPI Configuration Suspend To RAM Repost Video on STR - ASRock X58 SuperComputer | User Manual - Page 65
default value is [Disabled]. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows® VistaTM certification. 3.4.4IDE Configuration BIOS SETUP UTILITY Advanced IDE Configuration SATAII Configuration [Enhanced] Configure SATAII as [IDE] Onboard IDE and 1394 - ASRock X58 SuperComputer | User Manual - Page 66
the "Primary IDE Master" as the example in the following instruction. BIOS SETUP UTILITY Advanced Primary IDE Master Device Vendor Size LBA Mode Block Data Transfer :Hard Disk :ST340014A :40.0 GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-5 :Supported [Auto] [Auto] [Auto] [Auto] [Auto] - ASRock X58 SuperComputer | User Manual - Page 67
Enabled]. 32-Bit Data Transfer Use this item to enable 32-bit access to maximize the IDE hard disk data transfer rate. 3.4.5PCIPnP Configuration BIOS SETUP UTILITY Advanced Advanced PCI / PnP Settings PCI Latency Timer PCI IDE BusMaster [64] [Enabled] Value in units of PCI clocks for PCI device - ASRock X58 SuperComputer | User Manual - Page 68
SETUP UTILITY Advanced Configure Super IO Chipset OnBoard Floppy Controller Serial Port Address Infrared Port Address [Enabled] [3F8 / IRQ4] [Disabled] Allow BIOS to Enable or Disable Floppy Controller. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and - ASRock X58 SuperComputer | User Manual - Page 69
this item to enable or disable the USB 2.0 support. Legacy USB Support Use this option to select legacy support for USB devices. There are four configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup Only]. The default value is [BIOS Setup Only]. Please refer to below descriptions for - ASRock X58 SuperComputer | User Manual - Page 70
the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Hardware Health Event Monitoring CPU Temperature - ASRock X58 SuperComputer | User Manual - Page 71
this section, it will display the available devices on your system for you to configure the boot settings and the boot priority. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Boot Settings Boot Settings Configuration Configure Settings during System Boot. 1st Boot Device - ASRock X58 SuperComputer | User Manual - Page 72
"Full Screen Logo". Configuration options: [Auto], [PCIE2.0 Revolution], [Scenery] and [ASRock]. The default value is [Auto]. Currently, the option [Auto] is set to system. For the user password, you may also clear it. BIOS SETUP UTILITY Main Smart Advanced H/W Monitor Boot Security Exit Security - ASRock X58 SuperComputer | User Manual - Page 73
and exit setup?" Select [OK] to save the changes and exit the BIOS SETUP UTILITY. Discard Changes and Exit When you select this option, it message, "Discard changes and exit setup?" Select [OK] to exit the BIOS SETUP UTILITY without saving any changes. Discard Changes When you select this option - ASRock X58 SuperComputer | User Manual - Page 74
install the necessary drivers to activate the devices. 4.2.3 Utilities Menu The Utilities Menu shows the applications software that the motherboard supports. Click on a specific item then follow the installation wizard to install it. 4.2.4 Contact Information If you need to contact ASRock or want to
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
 |
 |
1
X58 SuperComputer
User Manual
Version 1.2
Published April 2009
Copyright©2009 ASRock INC. All rights reserved.