ASRock X79 Extreme3 Quick Installation Guide - Page 33
Front Panel Audio Header
View all ASRock X79 Extreme3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
(9-pin USB_10_11) (see p.2 No. 24) USB_PWR P-11 P+11 GND DUMMY 1 GND P+10 P-10 USB_PWR USB 3.0 Header (19-pin USB3_2_3) (see p.2 No. 9) 1 ID IntA_P3_D+ IntA_P3_DGND IntA_P3_SSTX+ IntA_P3_SSTXGND IntA_P3_SSRX+ IntA_P3_SSRXVbus IntA_P2_D+ IntA_P2_DGND IntA_P2_SSTX+ IntA_P2_SSTXGND IntA_P2_SSRX+ IntA_P2_SSRXVbus Infrared Module Header (5-pin IR1) (see p.2 No. 28) IRTX +5VSB DUMMY 1 GND IRRX Consumer Infrared Module Header (4-pin CIR1) IRRX GND (see p.2 No. 27) 1 ATX+5VSB IRTX Front Panel Audio Header (9-pin HD_AUDIO1) (see p.2 No. 31) Besides two default USB 3.0 ports on the I/O panel, there is one USB 3.0 header on this motherboard. This USB 3.0 header can support two USB 3.0 ports. This header supports an optional wireless transmitting and receiving infrared module. This header can be used to connect the remote controller receiver. This is an interface for front panel audio cable that allows convenient connection and control of audio devices. English 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC'97 audio panel, please install it to the front panel audio header as below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel. 33 ASRock X79 Extreme3 Motherboard